GE ZV541, ZV421 installation instructions Ductwork, Finish the Ceiling

Page 12

Installation Instructions

STEP 1 CONSTRUCT CEILING SUPPORT CONTINUED

Secure each 2 x 4 block with at least four (4), #10 wood screws, 3” long (not supplied). Use 8 wood screws total for the two supports.

The cross framing must be accurately aligned to assure correct positioning of the hood.

The cross framing must be level in all directions. Check with a spirit level and adjust if necessary.

IMPORTANT: The ceiling structure must be capable of supporting the weight of the hood (approximately 300 pounds) and any inadvertent user contact loads. The hood support frame will be supported by the 2 x 4 cross framing.

Ductwork

Use the shortest and straightest duct route possible. For satisfactory performance, duct run should not exceed 150 feet equivalent length for any duct configuration.

Refer to “Duct Fittings” chart to compute the maximum permissible length for duct runs to the outdoors.

This vent hood must use 10” round rigid duct.

Install the house ductwork to run horizontally between ceiling joists or straight up through the roof.

Finish the Ceiling

Finish the ceiling surface. Be sure to mark location of the ceiling joists and cross framing. Check to be sure the ceiling is level, use shims if necessary.

2x 4 Min.

Cross Framing

Ceiling

 

Joist

 

8-5/8"

17"

 

 

(54" Hood)

12-3/4" (42" Hood)

Height

Adjustment

Screw Holes

Ceiling Joint

10"

Duct

2x4

Vent Straight Up

Through The Ceiling

12

Image 12
Contents Installation Instructions For Proper Installation Pour Faire UNE Installation CorrecteTo Reduce the Risk of FIRE, USE only Metal Ductwork Faut Observer LES Regles SuivantesContents Hood DimensionsDuct Cover Accessories Product ClearancesZV42I ZV54IPower Supply Advance PlanningDetermine Installation Height AccessoriesFt. Ceiling SuppliedDuct Fittings Flexible ductingTools and Materials Required Remove the PackagingBe careful not to scratch the hood Accessory Package Parts ProvidedHardware Package Locate the parts packed with the hoodConstruct Ceiling Support Plan the Location of the Hood and DuctworkJoist SpacingAlign duct DuctDuctwork Finish the CeilingSize and Install Ductwork Mount TemplateRock Install Accessory or Supplied Support and Duct Covers Adjust telescoping accessory frame to lengthSecure house wiring Install Hood Tighten the screws Install Safety ScrewsConnect Duct Bumper Pads Duct Transition Attachment ScrewsInstall the Motor Verify that power is turned off at the sourceConnect Electrical Install Filters Install Rods Skip this Step if Using the Supplied Duct CoverSlide Duct Cover Down Slide the lower duct cover down onto the hoodFinalize Installation Install DuctInstallation Checklist Check Blower Safety ScrewCheck appearance and installation Check Operating Sound and Proper Air-FlowGE Consumer & Industrial

ZV421, ZV541 specifications

The GE ZV541 and ZV421 are prominent offerings in the realm of multi-function medical imaging devices, widely recognized for their advanced features, robust technologies, and user-friendly characteristics that cater to the needs of healthcare professionals.

The GE ZV541 is designed primarily for a wide range of imaging applications, including vascular, cardiac, and general imaging. One of its most outstanding features is its cutting-edge imaging technology, which employs advanced digital signal processing to produce high-resolution images with exceptional clarity. This enables practitioners to make accurate diagnoses and evaluate complex conditions with confidence. The ZV541 also integrates automated image optimization algorithms, ensuring that images are consistently of high quality, regardless of the operator's experience level.

Additionally, the ZV541 offers a range of versatility with its multi-modal capabilities, allowing it to perform ultrasound imaging alongside other imaging techniques. This flexibility is critical in a busy clinical environment where different modalities might be required for patient assessment. Its user-friendly interface simplifies navigation, enabling practitioners to focus more on patient care rather than on the technical complexities of the equipment.

On the other hand, the GE ZV421 excels in providing compact and reliable imaging solutions, particularly in settings where space and portability are key considerations. It retains many of the advanced imaging capabilities of its larger counterpart while being designed for ease of transport and quick setup. The ZV421 incorporates similar digital enhancement technologies that ensure high-quality output with quick turnaround times.

Both devices are equipped with intuitive touchscreen controls that enhance the user experience, making it easier to adjust settings and quickly access frequently used features. They also come with integrated data management systems that facilitate seamless sharing and storage of patient data, complying with modern healthcare standards for efficiency and security.

In summary, the GE ZV541 and ZV421 combine state-of-the-art imaging technologies with versatility and user-friendly designs. These devices are ideal for healthcare environments that require reliable performance along with superior diagnostic capabilities. Their features not only improve workflow but also enhance the overall quality of patient care, making them invaluable tools in contemporary medical practices.