GE ZV421, ZV541 installation instructions Mount Template, Size and Install Ductwork, Rock

Page 13

Installation Instructions

STEP 2 MOUNT TEMPLATE

• Select the template for your hood size.

 

• Align the template with the marks on the ceiling and

 

tape in place.

 

– Be sure the template is oriented correctly,

 

with the front of the hood.

 

• Use a plumb to check to be sure the mounting

 

holes will provide parallel alignment with the

 

countertop below.

 

• Center punch all hole locations.

 

• Drill pilot holes in the 4 screw locations. Use a

 

3/16” bit and drill approximately 1-1/2” deep.

 

• Drive 4 Hex head wood screws (Screws A) into

 

the center of the ceiling joists and cross framing.

 

Leave a 1/4" gap to allow the screw head to

 

engage the keyhole slots on the support frames.

 

• Cut the 10-1/2" duct opening through the sheet

Screws A

rock.

 

1/4" Gap

STEP 3 SIZE AND INSTALL DUCTWORK

Measure from house duct flange to bottom of support frame. Subtract 4-3/8" for clearance to the bottom of the support frame.

Cut the 10” duct length to size.

Secure duct to house ducting with sheet metal screws.

Seal all connections with duct tape.

Attach the duct collar loosely, about 1" from the bottom of the duct using Screws B.

House

Duct

Duct

Length

Duct

Duct

Collar

Screws B

4-3/8" Clearance to Bottom of Frame

13

Image 13
Contents Installation Instructions Pour Faire UNE Installation Correcte For Proper InstallationTo Reduce the Risk of FIRE, USE only Metal Ductwork Faut Observer LES Regles SuivantesHood Dimensions ContentsProduct Clearances Duct Cover AccessoriesZV42I ZV54IAdvance Planning Power SupplyAccessories Determine Installation HeightFt. Ceiling SuppliedFlexible ducting Duct FittingsRemove the Packaging Tools and Materials RequiredBe careful not to scratch the hood Parts Provided Accessory PackageHardware Package Locate the parts packed with the hoodPlan the Location of the Hood and Ductwork Construct Ceiling SupportSpacing JoistAlign duct DuctFinish the Ceiling DuctworkMount Template Size and Install DuctworkRock Adjust telescoping accessory frame to length Install Accessory or Supplied Support and Duct CoversSecure house wiring Tighten the screws Install Safety Screws Install HoodConnect Duct Bumper Pads Duct Transition Attachment ScrewsVerify that power is turned off at the source Install the MotorConnect Electrical Skip this Step if Using the Supplied Duct Cover Install Filters Install RodsSlide Duct Cover Down Slide the lower duct cover down onto the hoodInstall Duct Finalize InstallationCheck Blower Safety Screw Installation ChecklistCheck appearance and installation Check Operating Sound and Proper Air-FlowGE Consumer & Industrial

ZV421, ZV541 specifications

The GE ZV541 and ZV421 are prominent offerings in the realm of multi-function medical imaging devices, widely recognized for their advanced features, robust technologies, and user-friendly characteristics that cater to the needs of healthcare professionals.

The GE ZV541 is designed primarily for a wide range of imaging applications, including vascular, cardiac, and general imaging. One of its most outstanding features is its cutting-edge imaging technology, which employs advanced digital signal processing to produce high-resolution images with exceptional clarity. This enables practitioners to make accurate diagnoses and evaluate complex conditions with confidence. The ZV541 also integrates automated image optimization algorithms, ensuring that images are consistently of high quality, regardless of the operator's experience level.

Additionally, the ZV541 offers a range of versatility with its multi-modal capabilities, allowing it to perform ultrasound imaging alongside other imaging techniques. This flexibility is critical in a busy clinical environment where different modalities might be required for patient assessment. Its user-friendly interface simplifies navigation, enabling practitioners to focus more on patient care rather than on the technical complexities of the equipment.

On the other hand, the GE ZV421 excels in providing compact and reliable imaging solutions, particularly in settings where space and portability are key considerations. It retains many of the advanced imaging capabilities of its larger counterpart while being designed for ease of transport and quick setup. The ZV421 incorporates similar digital enhancement technologies that ensure high-quality output with quick turnaround times.

Both devices are equipped with intuitive touchscreen controls that enhance the user experience, making it easier to adjust settings and quickly access frequently used features. They also come with integrated data management systems that facilitate seamless sharing and storage of patient data, complying with modern healthcare standards for efficiency and security.

In summary, the GE ZV541 and ZV421 combine state-of-the-art imaging technologies with versatility and user-friendly designs. These devices are ideal for healthcare environments that require reliable performance along with superior diagnostic capabilities. Their features not only improve workflow but also enhance the overall quality of patient care, making them invaluable tools in contemporary medical practices.