GE ZV421, ZV541 Install Hood, Connect Duct, Bumper Pads Duct Transition Attachment Screws

Page 15

Installation Instructions

STEP 5 INSTALL DUCT TRANSITION WITH DAMPER

Bumper Pads

Duct

Transition

Attachment

Screws

Screws C

IMPORTANT: Remove shipping tape from damper and check that damper moves freely.

Place the transition piece over the hood exhaust and secure with 4 Screws C provided.

Use duct tape to seal the connection. Check to be sure the damper moves freely.

STEP 6 INSTALL HOOD

Note: THREE PEOPLE ARE REQUIRED TO COMPLETE THIS INSTALLATION!

1/4" Gap

Attachment

Keyholes

Back out the hanging screws on the bottom of the support frame to a 1/4" gap.

Lift the hood up to the support frame. Carefully align the hood keyhole to the screws on the support frame. Slide the hood to engage the keyhole slots.

Tighten the screws.

Install

2 Safety

Screws

Screws C

Install safety screws into the top of the hood as shown.

Check hood level in both directions.

STEP 7 CONNECT DUCT

Loosen duct collar and slide down to cover gap between transition and house duct.

Tighten collar

screws and tape all joints.

Seal all connections with duct tape.

Slide Duct

Collar Down

to Cover Gap

Note: Do not drive screws through this duct connection. Doing so will prevent proper damper operation.

15

Image 15
Contents Installation Instructions Faut Observer LES Regles Suivantes For Proper InstallationPour Faire UNE Installation Correcte To Reduce the Risk of FIRE, USE only Metal DuctworkHood Dimensions ContentsZV54I Duct Cover AccessoriesProduct Clearances ZV42IAdvance Planning Power SupplySupplied Determine Installation HeightAccessories Ft. CeilingFlexible ducting Duct FittingsTools and Materials Required Remove the PackagingBe careful not to scratch the hood Locate the parts packed with the hood Accessory PackageParts Provided Hardware PackagePlan the Location of the Hood and Ductwork Construct Ceiling SupportDuct JoistSpacing Align ductFinish the Ceiling DuctworkSize and Install Ductwork Mount TemplateRock Install Accessory or Supplied Support and Duct Covers Adjust telescoping accessory frame to lengthSecure house wiring Bumper Pads Duct Transition Attachment Screws Install HoodTighten the screws Install Safety Screws Connect DuctInstall the Motor Verify that power is turned off at the sourceConnect Electrical Slide the lower duct cover down onto the hood Install Filters Install RodsSkip this Step if Using the Supplied Duct Cover Slide Duct Cover DownInstall Duct Finalize InstallationCheck Operating Sound and Proper Air-Flow Installation ChecklistCheck Blower Safety Screw Check appearance and installationGE Consumer & Industrial

ZV421, ZV541 specifications

The GE ZV541 and ZV421 are prominent offerings in the realm of multi-function medical imaging devices, widely recognized for their advanced features, robust technologies, and user-friendly characteristics that cater to the needs of healthcare professionals.

The GE ZV541 is designed primarily for a wide range of imaging applications, including vascular, cardiac, and general imaging. One of its most outstanding features is its cutting-edge imaging technology, which employs advanced digital signal processing to produce high-resolution images with exceptional clarity. This enables practitioners to make accurate diagnoses and evaluate complex conditions with confidence. The ZV541 also integrates automated image optimization algorithms, ensuring that images are consistently of high quality, regardless of the operator's experience level.

Additionally, the ZV541 offers a range of versatility with its multi-modal capabilities, allowing it to perform ultrasound imaging alongside other imaging techniques. This flexibility is critical in a busy clinical environment where different modalities might be required for patient assessment. Its user-friendly interface simplifies navigation, enabling practitioners to focus more on patient care rather than on the technical complexities of the equipment.

On the other hand, the GE ZV421 excels in providing compact and reliable imaging solutions, particularly in settings where space and portability are key considerations. It retains many of the advanced imaging capabilities of its larger counterpart while being designed for ease of transport and quick setup. The ZV421 incorporates similar digital enhancement technologies that ensure high-quality output with quick turnaround times.

Both devices are equipped with intuitive touchscreen controls that enhance the user experience, making it easier to adjust settings and quickly access frequently used features. They also come with integrated data management systems that facilitate seamless sharing and storage of patient data, complying with modern healthcare standards for efficiency and security.

In summary, the GE ZV541 and ZV421 combine state-of-the-art imaging technologies with versatility and user-friendly designs. These devices are ideal for healthcare environments that require reliable performance along with superior diagnostic capabilities. Their features not only improve workflow but also enhance the overall quality of patient care, making them invaluable tools in contemporary medical practices.