GE ZV541 Connect Electrical, Install the Motor, Verify that power is turned off at the source

Page 16

Installation Instructions

STEP 8 CONNECT ELECTRICAL

Verify that power is turned off at the source.

• Install strain relief onto the knockout of the junction

WARNING: If house wiring is not

box.

• Insert house wiring through strain relief and tighten.

2-wire with a ground wire, a ground must be provided

• Use wire nuts to connect incoming ground to green,

by the installer. When house wiring is aluminum, be

white to white and black to black.

sure to use UL approved anti-oxidant compound and

• Push wires into junction box and replace cover. Be sure

aluminum-to-copper connectors.

wires are not pinched.

 

ATTENTION – Si le câblage de la

 

maison n’est pas du type à deux fils avec un fil de

 

terre, l’installateur doit fournir un circuit de terre.

 

Quand les fils de la maison sont en aluminium, il

 

prendre soin d’utiliser de la pâte antioxidation

 

approuvée par UL et des connecteurs pour

 

l’aluminium-cuivre.

 

STEP 9 INSTALL THE MOTOR

Outlet

Attachment

Spring

Slot

Clip

 

 

Attachment Screw

 

 

and Washer

 

 

 

 

 

 

 

 

Top

IMPORTANT: Connector ends are designed to mate only one way. Match flat and round connectors as shown.

Screw F

Attachment

Spring

Junction Box

Slot

Clip

From the inside of the hood, slip motor into the attachment slot on the left.

Rotate motor upwards until it snaps into the spring clip on the right.

Secure the motor to the hood with the machine screw and lock washer (Screw is marked with red paint.)

Plug blower cable into the connector on the blower.

Plug cable at the top of the hood into the junction box connector. Route cable so it won’t be pinched or damaged when the duct cover is lowered.

16

Image 16
Contents Installation Instructions For Proper Installation Pour Faire UNE Installation CorrecteTo Reduce the Risk of FIRE, USE only Metal Ductwork Faut Observer LES Regles SuivantesContents Hood DimensionsDuct Cover Accessories Product ClearancesZV42I ZV54IPower Supply Advance PlanningDetermine Installation Height AccessoriesFt. Ceiling SuppliedDuct Fittings Flexible ductingRemove the Packaging Tools and Materials RequiredBe careful not to scratch the hood Accessory Package Parts ProvidedHardware Package Locate the parts packed with the hoodConstruct Ceiling Support Plan the Location of the Hood and DuctworkJoist SpacingAlign duct DuctDuctwork Finish the CeilingMount Template Size and Install DuctworkRock Adjust telescoping accessory frame to length Install Accessory or Supplied Support and Duct CoversSecure house wiring Install Hood Tighten the screws Install Safety ScrewsConnect Duct Bumper Pads Duct Transition Attachment ScrewsVerify that power is turned off at the source Install the MotorConnect Electrical Install Filters Install Rods Skip this Step if Using the Supplied Duct CoverSlide Duct Cover Down Slide the lower duct cover down onto the hoodFinalize Installation Install DuctInstallation Checklist Check Blower Safety ScrewCheck appearance and installation Check Operating Sound and Proper Air-FlowGE Consumer & Industrial

ZV421, ZV541 specifications

The GE ZV541 and ZV421 are prominent offerings in the realm of multi-function medical imaging devices, widely recognized for their advanced features, robust technologies, and user-friendly characteristics that cater to the needs of healthcare professionals.

The GE ZV541 is designed primarily for a wide range of imaging applications, including vascular, cardiac, and general imaging. One of its most outstanding features is its cutting-edge imaging technology, which employs advanced digital signal processing to produce high-resolution images with exceptional clarity. This enables practitioners to make accurate diagnoses and evaluate complex conditions with confidence. The ZV541 also integrates automated image optimization algorithms, ensuring that images are consistently of high quality, regardless of the operator's experience level.

Additionally, the ZV541 offers a range of versatility with its multi-modal capabilities, allowing it to perform ultrasound imaging alongside other imaging techniques. This flexibility is critical in a busy clinical environment where different modalities might be required for patient assessment. Its user-friendly interface simplifies navigation, enabling practitioners to focus more on patient care rather than on the technical complexities of the equipment.

On the other hand, the GE ZV421 excels in providing compact and reliable imaging solutions, particularly in settings where space and portability are key considerations. It retains many of the advanced imaging capabilities of its larger counterpart while being designed for ease of transport and quick setup. The ZV421 incorporates similar digital enhancement technologies that ensure high-quality output with quick turnaround times.

Both devices are equipped with intuitive touchscreen controls that enhance the user experience, making it easier to adjust settings and quickly access frequently used features. They also come with integrated data management systems that facilitate seamless sharing and storage of patient data, complying with modern healthcare standards for efficiency and security.

In summary, the GE ZV541 and ZV421 combine state-of-the-art imaging technologies with versatility and user-friendly designs. These devices are ideal for healthcare environments that require reliable performance along with superior diagnostic capabilities. Their features not only improve workflow but also enhance the overall quality of patient care, making them invaluable tools in contemporary medical practices.