Maytag W10321481A Connect Water Supply, Water Pressure, Reverse Osmosis Water Supply

Page 4

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Locate a ¹⁄₂" (1.27 cm) to 1¹⁄₄" (3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

Make sure it is a cold water pipe.

Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the lower rear corner of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" (6.35 mm) hole in the cold water pipe you have selected.

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" (6.35 mm) drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so the washer makes a watertight seal. Do not overtighten, or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw the compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

Connect to Refrigerator

Style 1

1.Unplug refrigerator or disconnect power.

2.Remove and discard the plastic part that is attached to the inlet of the water valve.

3.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

4.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

5.Turn shutoff valve ON.

6.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

 

A

 

B

 

C

 

D

 

E

A. Tube clamp

D. Compression nut

B. Tube clamp screw

E. Valve inlet

C. Copper tubing

 

7.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.

3.If the gray water tube supplied with the refrigerator is not long enough, a ¹⁄₄" x ¹⁄₄" (6.35 mm x 6.35 mm) coupling is needed in order to connect the water tubing to an existing household water line. Thread the provided nut onto the coupling on the end of the copper tubing.

4

Image 4
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Location Requirements Electrical RequirementsWater Supply Requirements Recommended Grounding MethodConnect Water Supply Water PressureReverse Osmosis Water Supply Connect to Water LineUsing the Controls Complete the InstallationTemperature Control Adjustment and Cooling On/Off Refrigerator USEConvertible Drawer Temperature Control Adjusting the ControlsAdditional Features Condition Temperature AdjustmentChilled Door Bin Crisper Humidity ControlWater and Ice Dispensers Units Default Minimum Maximum To Dispense Water Measured FillIce Dispenser To Dispense IceIce Maker and Storage Bin Water Filtration SystemCleaning To Clean Your RefrigeratorRefrigerator Care Changing the Light BulbsTroubleshooting Refrigerator OperationTemperature and Moisture Ice and WaterAccessories Stainless Steel Cleaner and PolishWater is leaking from the dispenser Dispenser water is not cool enough on some modelsWater Filter Certifications Performance Data Sheets Base Grille Water Filtration SystemBase Grille Water Filtration System Base Grille Water Filtration System Base Grille Water Filtration System Maytag Major Appliance Warranty Limited WarrantyItems Excluded from Warranty This limited warranty does not coverInstrucciones Para EL Usuario DEL Refrigerador Seguridad DEL RefrigeradorInstrucciones DE Instalación Desempaque el refrigeradorRequisitos de ubicación Antes de tirar su viejo refrigerador o congeladorRequisitos eléctricos Requisitos del suministro de aguaMétodo de conexión a tierra recomendado Presión del aguaConexión a la línea de agua Conexión del suministro de aguaConexión al refrigerador Estilo Uso de los controles USO DE SU RefrigeradorCómo terminar la instalación Cómo ajustar los controles Características adicionales Condición Regulación DE LA TemperaturaDepósito enfriador de la puerta Control de temperatura del Cajón convertibleDespachadores de agua y hielo Para despachar agua Llenado medido Para despachar agua estándarUnidades Prefijado Mínimo Máximo El despachador de hielo Para despachar hieloLa luz del despachador en algunos modelos El bloqueo del despachador en algunos modelosFábrica de hielo y depósito Sistema de filtración de aguaCuidado DE SU Refrigerador LimpiezaCómo cambiar los focos Para limpiar su refrigeradorSolución DE Problemas Funcionamiento del refrigeradorTemperatura y humedad Hielo y aguaAccesorios El despachador de agua no funciona debidamenteHay fugas de agua del despachador Limpiador de acero inoxidableHoja DE Datos DEL Rendimiento Sistema de filtración de agua de la rejilla de la baseSistema de filtración de agua de la rejilla de la base Sistema de filtración de agua de la rejilla de la base Sistema de filtración de agua de la rejilla de la base Maytag Garantía LimitadaExclusiones DE LA Garantía Esta garantía limitada no cubreInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions Dinstallation Exigences demplacementDéballage du réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurMéthode recommandée de mise à la terre Spécifications électriquesSpécifications de l’alimentation en eau Pression de leauRaccordement à une canalisation d’eau Raccordement de la canalisation deauRaccordement au réfrigérateur Style Achever l’installation Utilisation des commandesUtilisation DU Réfrigérateur Ajustement des commandes Caractéristiques supplémentaires Condition Ajustement DE LA TempératureCommande de température dans Le tiroir convertible Commande du compartiment fraîcheur dans la porteDistributeurs d’eau et de glaçons Le distributeur deauDistribution deau remplissage mesuré Distribution deau standardUnités Par défaut Minimum Maximum Le distributeur de glaçons Distribution de glaceLa lampe du distributeur sur certains modèles Le verrouillage du distributeur sur certains modèlesPour retirer et réinstaller le bac à glaçons Remplacement du filtre à eauSystème de filtration de leau Mise en marche/arrêt de la machine à glaçonsRemplacement des ampoules d’éclairage Entretien DU RéfrigérateurNettoyage Nettoyage de votre réfrigérateurDépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauAccessoires Le distributeur deau ne fonctionne pas correctementDe leau suinte du distributeur Nettoyant et poli pour acier inoxydableFeuilles DE Données SUR LA Performance Système de filtration deau de la grille de la baseSystème de filtration deau de la grille de la base 909 mg/L Mg/L ± 10 % 05 mg/L 97,4 Particules classe 4200 #/mL 1900 #/mL 99,9 Garantie DE Gros Appareil Ménager Maytag Garantie LimitéeÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasW10321481A EN/FR PN W10321480A

W10321481A specifications

Maytag W10321481A is a high-efficiency washer that stands out for its robust construction and innovative features, making laundry tasks more manageable and effective. This model is designed to cater to the needs of busy households, with a focus on durability, performance, and user convenience.

One of the key features of the Maytag W10321481A is its impressive capacity. With a large drum size, this washer can handle substantial loads, making it ideal for families or anyone who frequently deals with oversized laundry. The spacious interior allows users to wash comforters and bulky items without the need for multiple cycles, saving both time and energy.

The Maytag W10321481A comes equipped with a powerful agitation system that ensures thorough cleaning. This system utilizes an advanced wash action that helps to remove tough stains and dirt effectively. The robust motor is designed to deliver consistent performance, even with heavy loads, which is crucial for maintaining the washer's efficiency over time.

In addition to superior cleaning capabilities, the Maytag W10321481A features a selection of wash cycles and options tailored for various fabric types and soil levels. Users can choose from multiple settings, including normal, heavy duty, and quick wash, allowing for flexibility depending on the laundry needs. This adaptability ensures that clothing is treated with care, extending the lifespan of fabrics.

Energy efficiency is another hallmark of the Maytag W10321481A. The washer is engineered to consume less water and electricity while delivering outstanding cleaning results. This not only helps reduce utility bills but also contributes to environmental sustainability, which is an important consideration for many consumers today.

Moreover, this model includes innovative technologies such as the PowerWash Cycle, which targets tough stains with extra cleaning action and heated water, ensuring that clothes come out spotless. The appliance also features an Agitator that enhances the performance of the washer during cycles, providing effective cleaning without sacrificing gentleness on delicate items.

Durability is a defining characteristic of Maytag appliances, and the W10321481A is no exception. Constructed with high-quality materials, including a stainless steel wash basket that resists chipping and scratching, this washer is built to withstand frequent use. Additionally, Maytag backs its products with a robust warranty, offering peace of mind to users regarding the reliability of their investment.

In conclusion, the Maytag W10321481A is a powerful, versatile, and durable washing machine that meets the demands of modern households. With its combination of advanced technology, impressive capacity, and energy efficiency, it is a commendable choice for anyone looking to enhance their laundry experience.