Fisher & Paykel OD30WDX1 Care and maintenance, Cleaning the warming drawer

Page 15

Care and maintenance

13

US CA

Cleaning the warming drawer

Be careful cleaning any part of this appliance, particularly the drawer box and back of the drawer face. All parts of the drawer can be cleaned with a hot soapy damp cloth, rinsed, dried and buffed with a heavy pile cloth. Always try this first, as it is the mildest cleaning procedure.

Be sure the Warming Drawer is turned off and the appliance is cool before using any type of aerosol cleaner on or around the appliance. The chemical that produces the spraying action could, in the presence of heat, ignite or cause metal parts to corrode.

Use the mildest cleaning procedure first. Some brands of cleaners are harsher than others, read their directions. Try on a small area first.

To avoid marring the surface always rub the metal finishes in the direction of the polish grain lines. The cleaner will be more effective when used in the direction of the polish lines.

Use only clean sponges, soft cloths, paper towels, plastic or non-metal soap pads for cleaning or scouring, as recommended in this section. (Caution: some soap pads can scratch).

Be sure to rinse all parts thoroughly and to wipe dry to avoid water marks. Remove food particles after every use.

1.Drawer: Clean the drawer with warm soapy damp sponge or cloth.

2.Drawer Front: Shine with stainless steel cleaner in direction of grain. Clean glass with glass cleaner.

3.Gasket: Clean with with hot water only. Do not rub. Press a dry towel on the gasket to dry. Do not remove or damage the mesh.

4.Knobs: The on/off temperature knob may be removed to be cleaned. The moist/crisp knob, however, should never be removed. Be aware that the pull off force of the knobs will decrease and a loose knob could become a choking hazard for small children.

5.Light: Clean with damp cloth or sponge.

6.Element: Care should be taken when cleaning the heating element. Only clean the element when the unit is cool. Use warm soapy water on damp cloth.

7.Stainless Steel tray: Can be removed and cleaned with hot soapy water at sink.

Image 15
Contents Installation instructions and User guide Page Please Retain this Manual for Future Reference Contents Preheating Instructions Read and Understand these PrecautionsSafety practices and precautions US CA FeaturesBase Cabinet Installation SpecificationsWall Cabinet Installation InstallationRemoving the drawer Mounting Installation of Chassis Slot Power cord Replacing the drawer Adjusting the latchProofing Yeast Dough Preheat time and temperature selectorOperating Instructions Operational guideCleaning the warming drawer Care and maintenanceSuggested temperatures to keep foods hot Temperature settingsHow To Obtain Service ServiceFisher & Paykel undertakes to WarrantyLimited warranty How long does this limited warranty last?This warranty does not cover No other warranties Commercial useAvertissement Contenu Caracteristiques Instructions Relatives a L’INSTALLATIONInstructions de préchauffage Veuillez lire et bien assimiler ces consignesMesures de sécurité et de précaution Mesures de sécurité et de précaution Caracteristiques du chauffe-plats Spécifications Installation de l’élément de baseDe chauffe-plats Préparation des armoiresÉtape 1 Retrait du chauffe-plats Étape 2 Installation de montage du châssis Cordon Ajustage du loquet Replacement du tiroirApprêt la pâte Guide opérationnelGuide opérationnel Préchauffer et sélecteur de températureNettoyage du chauffe-plats Entretien et utilisationTempératures suggérées pour garder les aliments chauds Réglages de températurePour l’obtention de service Durée de cette garantie limitée? GarantieGarantie limitée Fisher & Paykel s’engage àUtilisation commerciale Cette garantie ne couvre pas les points suivantsAucune autre garantie Page Page US CA