Fisher & Paykel OD30WDX1 installation instructions Specifications, Base Cabinet Installation

US CA

6	Installation
Specifications
	DIMENSIONS (FRONT VIEW)
	10-1/2"
	29-11/16"

Fig. 02

DIMENSIONS (SIDE VIEW)
28-3/16"
25-1/16"	POWER
23-1/2"	CORD
1/2"
	9-3/4"
1/4"

Fig. 03

Base Cabinet Installation

The cabinet depth from the outer edge of the face frame to the inside back of the cabinet or wall should be at least 24” (see Fig. 04).

The Warming Drawer should be installed into a base cabinet with minimum outside dimensions of 13-1/4” high by 30” wide by 24” deep.

Power supply required: 120Volts AC; 5 Amp min., 15 Amp maximum circuit requirement.

CUT OUT DIMENSIONS

1-1/2" min. to bottom of countertop

20"

10 +– 1/16"

25-3/4 +–1/16"

A 120 volt AC GFI outlet should be located below the Warming Drawer

2x4's or similar support

>– 24"

Fig. 04