Fisher & Paykel OR90SDBSI Using the Auto Heat-reduce feature, Using the PowerBoost feature

Page 29

Using your cooktop’s special features

27

Using the Auto Heat-reduce feature

This feature is available on all the cooking zones

Turn the control dial anti-clockwise to the ‘A’ setting and then release the dial (after the ‘beep’); the symbol lights up on the corresponding cooking zone display. Within 5 seconds turn the dial to the desired power level (between 1 and 9); once a setting has been selected, and the chosen power level will flash in alternation on the control panel display.

This feature allows the cooking zone to operate at the maximum power (100%) for a time proportional to the selected power level; after this time the cooking zone will operate at the selected level.

While this feature is operating it is possible, at any time, to increase the selected power level but it is not possible to decrease the power.

The Auto Heat-reduce feature can be disabled by turning the dial anti-clockwise to a lower power level, turning the dial to the ‘0’ (Off) position or by selecting the PowerBoost feature.

Note: If removing the pan from the cooking zone before the programme has been completed, the Auto Heat-reduce feature will be completed with the remaining time if the pan is put back on the cooking zone within 10 minutes.

Using the PowerBoost feature

This feature is available on the front left/rear right zones only.

Turn the control dial clockwise to set the maximum power level (9), then turn clockwise again to

the setting and release the dial (after the ‘beep’); the control dial returns to the maximum

setting (9) automatically and the symbol lights up on the corresponding cooking zone display. The PowerBoost feature is now on.

This feature allows the cooking zone to operate at the PowerBoost maximum power (above the rated power) for a maximum of 5 minutes; it could be used, for example, to rapidly heat up a large amount of water.

The PowerBoost feature can be disabled by turning the dial anti-clockwise to a lower power

level, turning the dial to the ‘0’ (Off) position or by turning the dial again to the setting; in this case the cooking zone operates at the power level 9.

Note: if a cooking zone is still hot, it is not possible to use the PowerBoost feature and will flash if you try to activate. The cooking zone is automatically set to the maximum power level (9). The PowerBoost feature is always limited to a maximum of 5 minutes. You can activate the PowerBoost feature again after 5 minutes.

Important!

The PowerBoost feature is not suitable for use with non water based cooking.

Do not use this function for heating oil (e.g. deep fat frying). The power density may be too high and it could damage the cookware.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Installation instructions Page Contents General Safety and warningsInstallation Electrical Keep children away OperationImportant safety instructions Cooker overall dimensions mm Installation instructionsDimensions and clearances Levelling the cooker Fitting the adjustable feetFixing the backguard Moving the cookerTo fit the anti-tilt bracket Fitting the anti-tilt bracketVoltage and power consumption Connecting the power supply cableFeeder cable section Wiring diagram Wiring diagram key Before using your new oven, please Using your oven for the first timeIlluminated symbols Setting the clockButtons To set the clockFunction and temperature dials Using your ovenBake Cooking functionsBaking chart Lock stud Using the rotisserieRotate the fork screws to Loosen and tighten Fork Skewer Rotisserie drive holeUsing the electronic timer To set the oven for automatic cooking Automatic cookingInduction cooktop introduction Cooking zones display Been returned to 0 Off Choosing the right cookwareInduction cooking zone Choosing the right cookwarePower level Using your induction cooktopHot Surface Indicator Control dialsUsing the PowerBoost feature Using the Auto Heat-reduce featureThermal protection Using your cooktop’s special featuresMaximum usable power for the cooking zones Cooking guidelines Heat settingsCleaning the outside of the cooker Care and cleaningGeneral advice Cleaning the stainless steel surround strip Cleaning melts and spilloversCaring for your cooktop Metallic stainsDrop-down grill element Cleaning the inside of your ovenCleaning the grill tray and shelves Cleaning the enamel cavityCleaning the fat filter Fitting the sliding shelf supports Fitting and removing the sliding shelf supportsReplacing the oven lamp Turn the power to the cooker off at the wallStorage compartment Care and cleaning Removing the oven door Remove the inner glass retainer Removing the inner pane of glassRemoving the inner glass pane Remove the inner glass paneWhen replacing the inner glass pane, make sure that After cleaning, replace the inner glass paneReplace the glass retainer Replace the glass retainerRefit the door Error codes on the cooking zones display Cooktop fault codesError code Example As perTroubleshooting chart TroubleshootingBefore you call for service or assistance Warranty and serviceDealer Suburb Town Product detailsPage Page Page NZ AU GB IE

OR90SDBSI specifications

Fisher & Paykel is known for its innovative kitchen appliances, and the OR90SDBSI is a prime example of their commitment to quality and design in the world of cooking. This freestanding gas range appliance is engineered to meet the needs of both amateur and professional chefs, offering versatility, style, and functionality in one package.

One of the standout features of the OR90SDBSI is its 90 cm-wide cooking surface, which provides ample space for multiple dishes to be prepared simultaneously. The range features six powerful burners, including a dual-flame center burner, allowing for high precision cooking at varying heat levels. Whether you need a gentle simmer or a rapid boil, the OR90SDBSI delivers exceptional performance.

The oven capacity of the OR90SDBSI is another highlight. At 81 liters, it is spacious enough to accommodate large meals, making it ideal for family gatherings and entertaining. The oven uses a dual fan system for even heat distribution, resulting in consistent baking and roasting. With multiple cooking modes, including bake, broil, and self-cleaning, this range provides maximum flexibility for different culinary tasks.

Fisher & Paykel incorporates several advanced technologies into the OR90SDBSI to enhance user experience. The intuitive electronic controls make it easy to navigate settings, while the self-adjusting oven temperature ensures precision with every dish. The range also features a high-temperature self-cleaning function which alleviates the tedious task of manual cleaning.

In terms of design, the OR90SDBSI boasts a stainless steel finish that not only looks sleek but is also resistant to fingerprints and smudges. The easy-to-use push-and-turn dials add a classic touch and contribute to the overall aesthetic appeal of the kitchen. Furthermore, the oven door is triple-glazed to ensure safety and efficiency by retaining heat during cooking.

Safety features are built into the OR90SDBSI, including a flame failure device that automatically cuts off the gas supply if the flame is extinguished. This added layer of safety gives users peace of mind when cooking.

Overall, the Fisher & Paykel OR90SDBSI combines powerful performance with sophisticated design, making it a valuable addition to any modern kitchen. It caters to a broad range of cooking styles and preferences, showcasing Fisher & Paykel's commitment to excellence and innovation in kitchen appliances.
Top Page Image Contents