Fisher & Paykel OR90SDBSI installation instructions Safety and warnings, Installation, General

Page 4

2

Safety and warnings

Installation

WARNING!

Electrical Shock Hazard

If the ceramic glass cooktop surface becomes cracked, switch the appliance off at the mains power supply and call an Authorised Service Agent.

Always disconnect the cooker from the mains electricity supply before carrying out any maintenance operations or repairs.

Failure to follow this advice may result in death or electrical shock.

WARNING!

Cut Hazard

Take care - panel edges are sharp.

Failure to use caution could result in injury or cuts.

Important safety instructions

General

To avoid hazard, follow these instructions carefully before installing or using this product. Please make this information available to the person installing the product as it could reduce your installation costs.

Installation must comply with your local building and electricity regulations.

Failure to install the cooker correctly could invalidate any warranty or liability claims. Some appliances have a protective film. Remove this film before using the cooker. Do not modify this appliance.

Do not operate your appliance by means of an external timer or separate remote-control system. This appliance is to be installed and serviced only by an authorised person.

Image 4 Contents
Installation instructions Page Contents Installation Safety and warningsGeneral Electrical Operation Keep children awayImportant safety instructions Dimensions and clearances Installation instructionsCooker overall dimensions mm Fitting the adjustable feet Levelling the cookerMoving the cooker Fixing the backguardFitting the anti-tilt bracket To fit the anti-tilt bracketConnecting the power supply cable Voltage and power consumptionFeeder cable section Wiring diagram Wiring diagram key Using your oven for the first time Before using your new oven, pleaseSetting the clock Illuminated symbolsButtons To set the clockUsing your oven Function and temperature dialsCooking functions BakeBaking chart Using the rotisserie Lock studRotate the fork screws to Loosen and tighten Fork Skewer Rotisserie drive holeUsing the electronic timer Automatic cooking To set the oven for automatic cookingInduction cooktop introduction Cooking zones display Choosing the right cookware Been returned to 0 OffChoosing the right cookware Induction cooking zoneUsing your induction cooktop Power levelHot Surface Indicator Control dialsUsing the Auto Heat-reduce feature Using the PowerBoost featureMaximum usable power for the cooking zones Using your cooktop’s special featuresThermal protection Heat settings Cooking guidelinesGeneral advice Care and cleaningCleaning the outside of the cooker Cleaning melts and spillovers Cleaning the stainless steel surround stripCaring for your cooktop Metallic stainsCleaning the inside of your oven Drop-down grill elementCleaning the fat filter Cleaning the enamel cavityCleaning the grill tray and shelves Fitting and removing the sliding shelf supports Fitting the sliding shelf supportsStorage compartment Turn the power to the cooker off at the wallReplacing the oven lamp Care and cleaning Removing the oven door Removing the inner pane of glass Remove the inner glass retainerRemove the inner glass pane Removing the inner glass paneAfter cleaning, replace the inner glass pane When replacing the inner glass pane, make sure thatReplace the glass retainer Replace the glass retainerRefit the door Cooktop fault codes Error codes on the cooking zones displayError code Example As perTroubleshooting Troubleshooting chartWarranty and service Before you call for service or assistanceProduct details Dealer Suburb TownPage Page Page NZ AU GB IE