Fisher & Paykel OR60 Converting to a different gas type, Replacing the injectors, Injector

Page 14

12

Installation instructions

GAS COOKTOP MODELS

Converting to a different gas type

This appliance is suitable for use with Natural gas or LPG (check the “gas type” sticker attached to the appliance). To convert from one gas type to another, you need to replace the injectors, and then adjust the minimum burner setting.

Replacing the injectors

1Remove the trivets and burners from the cooktop.

2Using a spanner, remove the injector (shown in Figs. 11-12 following) and replace it with one according to the gas type (see the ‘Table for the choice of injectors’).

3Fix the warning label (supplied with the conversion kit) at the back of the cooker, near the gas inlet connections. This label states that the gas cooktop has been converted for use with LPG/ Natural gas.

Adjusting the minimum burner setting

4Follow the instructions on Page 13, ‘Adjusting the minimum burner setting’.

Important!

If you are converting the cooker from Natural gas to LPG, remove the gas pressure regulator before connecting the cooker to the gas supply and replace with the test point adaptor supplied with the conversion kit.

If you are converting the cooker from LPG to Natural gas, remove the test point adaptor before connecting the cooker to the gas supply and replace with the gas pressure regulator supplied with the conversion kit.

Notes:

- The burners are designed so that regulation of primary air is not required.

Injector

Injector

Fig. 11 Auxiliary and semi-rapid burners

Fig. 12 Triple-ring wok burner

Image 14

Contents Installation instructions and User guide Page Contents General Safety and warningsInstallation Power supply models with gas cooktop ElectricalOperation Important safety instructions Installation instructions Dimensions and clearancesSeven-function models only Levelling the cookerFixing the backguard Fitting the anti-tilt bracket Four-function models Installation instructions Connecting the cooker to the gas supply Installation with a flexible hose assemblyLeak-testing and flame-testing the cooker Important! Do not use a naked flame to test for leaksReplacing the injectors Adjusting the minimum burner settingConverting to a different gas type InjectorAdjusting the minimum burner setting Table for the choice of injectorsWiring diagram Four-function models Wiring diagram Seven-function modelsHeight min 900 max Product width Depth Cavity width For safety reasons and to ensure adequate Levelling the cooker+15 Power supply cable section Connecting the power supply cableVoltage and power consumption Installation Electric Diagram KEYUsing your oven for the first time FOUR-FUNCTION Models with GAS CooktopUsing your oven Function and temperature knobsCooking functions BakeUsing your gas cooktop Gas burnersBefore using your cooktop Using the gas burnersIf a burner does not light If the flame is irregularSmall pan support Matching cookware to burnerDiameters of pans which may be used on the cooktop Wok standCooktop troubleshooting Cleaning the outside of the cooker Care and cleaningGeneral advice Cleaning the gas cooktopBurner parts and trivets Replacing the auxiliary and semi-rapid burnersReplacing the triple-ring wok burner Correct positioning of cap and ring triple-ring wok burnerCleaning the oven door glass Cleaning the inside of your ovenCleaning the fat filter DrawerRemoving the oven door Replacing the oven lamp Removing the oven lampSure your kitchen is well ventilated during Using the timer Illuminated symbolsSetting the clock Setting the timer volumeTemperature and function knobs Oven Lamp Fat filter Automatic cooking Using your gas cooktop Flame failure safety feature Cleaning the ignitor and probe Burners Minimum Maximum Correct and incorrect matchingCooktop troubleshooting Problem Possible solutionsMonthly Burner parts and trivets Replacing the triple-ring wok burner Cleaning the inside of the oven Removing the side racksCaring for the catalytic panels Cleaning the enamel cavityWhen you replace the panels, make sure that To re-fit the sliding shelf support onto the side racks Sliding shelf supportsTo remove the sliding shelf supports Removing the inner and middle panes of glass Care and cleaning Replacing the middle and inner Panes of glass Care and cleaning Oven door can easily be removed as follows Replacing the oven lamp Storage drawer Oven function knob Cooktop ‘Element on’ indicator light Control panelClock and timer Using your oven Cooking functions Fat filter Automatic cooking Elements Using your ceramic glass cooktopCeramic glass cooktop Using the dual elements Figs a and 72b Using the elementsUsing the single elements Elements usage table Tips for using the elementsCooking tips Cookware tips Energy saving tipsThis. If the cooktop is not cleaned regularly Care and cleaning Spillovers Caring for your cooktopMetallic stains Models with Cleaning the enamel cavity Sliding shelf supports Removing the inner and middle Models with Replacing the middle and inner panes of glass Models Removing the oven door Handle Product details Warranty and serviceBefore you call for service or assistance Page NZ AU

Related manuals

Manual 32 pages 4.57 Kb

Manual 44 pages 38.22 Kb