Installation instructions | 7 |
|
Levelling the cooker
Important!
Using the supplied adjustable feet is MANDATORY. For safety reasons and to ensure adequate ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
| To fit the adjustable feet: |
|
1 | Rest the rear of the cooker on a piece of |
|
| packaging, exposing the base for fitting the |
|
| feet. |
|
2 | Screw the four feet to the cooker. |
|
3 | Stand the cooker and level it by screwing |
|
| or unscrewing the feet with an adjustable | Fig. 2 Fitting the adjustable feet |
| spanner. Use the supplied nuts if necessary. | (supplied with the cooker in the feet kit) |
|
|
See Figs. 3a and 3b.
Fixing the backguard
GAS COOKTOP MODELS
0
+ 8 mm
Fig. 3a Do not use the supplied nuts for height adjustments between 0 and 8 mm
(seven-function models only)
Before installing the cooker, assemble the backguard “B”.
The backguard “B” can be found packed at the rear of the cooker.
1Before assembling, remove any protective film/ adhesive tape.
2Remove the three screws “A” from the rear of the cooktop.
3Assemble the backguard as shown and fix it by screwing the three screws “A”.
B
A
+8 mm
+15 mm
Fig. 3b Use the supplied nuts for height | Fig. 4 Assembling the backguard |
adjustments between 8 and 15 mm | |
|
|
|
|