GE PTS18SHSSS, 197D5226P005 operating instructions Before YOU Begin, What YOU will Need

Page 8

Installation Instructions

1 INSTALLING THE WATER LINE (ON SOME MODELS)

BEFORE YOU BEGIN

Recommended copper water supply kits are WX8X2, WX8X3 or WX8X4, depending on the amount of tubing you need. Approved plastic water supply lines are GE SmartConnect™ Refrigerator Tubing (WX08X10006, WX08X10015 and WX08X10025).

When connecting your refrigerator to a GE Reverse Osmosis Water System, the only approved installation is with a GE RVKit. For other reverse osmosis water systems, follow the manufacturer’s recommendations.

This water line installation is not warranted by the refrigerator or icemaker manufacturer. Follow these instructions carefully to minimize the risk of expensive water damage.

Water hammer (water banging in the pipes) in house plumbing can cause damage to refrigerator parts and lead to water leakage or flooding. Call a qualified plumber to correct water hammer before installing the water supply line to the refrigerator.

To prevent burns and product damage, do not hook up the water line to the hot water line.

If you use your refrigerator before connecting the water line, make sure the feeler arm is in the STOP (up) position.

Do not install the icemaker tubing in areas where temperatures fall below freezing.

When using any electrical device (such as a power drill) during installation, be sure the device is double insulated or grounded in a manner to prevent the hazard of electric shock, or is battery powered.

All installations must be in accordance with local plumbing code requirements.

WHAT YOU WILL NEED

•Copper or GE SmartConnect™ Refrigerator Tubing kit, 1/4″ outer diameter to connect the refrigerator to the water supply. If using copper, be sure both ends of the tubing are cut square.

To determine how much tubing you need: measure the distance from the water valve on the back of the refrigerator to the water supply pipe. Then add 8′ (2.4 m). Be sure there is sufficient extra tubing (about 8′ [2.4 m] coiled into 3 turns of about 10″ [25 cm] diameter) to allow the refrigerator to move out from the wall after installation.

WHAT YOU WILL NEED (CONT.)

GE SmartConnect™ Refrigerator Tubing Kits are available in the following lengths:

6′ (1.8 m)

– WX08X10006

15′ (4.6

m)

– WX08X10015

25′ (7.6

m)

– WX08X10025

Be sure that the kit you select allows at least 8′ (2.4 m) as described above.

NOTE: The only GE approved plastic tubing is that supplied in GE SmartConnect™ Refrigerator Tubing kits. Do not use any other plastic water supply line because the line is under pressure at all times. Certain types of plastic will crack or rupture with age and cause water damage to your home.

•A GE water supply kit (containing tubing, shutoff valve and fittings listed below) is available at extra cost from your dealer or from Parts and Accessories, 1.800.661.1616.

•A cold water supply. The water pressure must be between 20 and 120 p.s.i. (1.4–8.1 bar).

• Power drill.

• 1/2″ or adjustable wrench.

• Straight and Phillips blade screwdriver.

•Two 1/4 ″ outer diameter compression nuts and

2 ferrules (sleeves)—to connect the copper tubing to the shutoff valve and the refrigerator water valve.

OR

•If you are using a GE SmartConnect™ Refrigerator Tubing kit, the necessary fittings are preassembled to the tubing.

•If your existing copper water line has a flared fitting at the end, you will need an adapter (available at plumbing supply stores) to connect the water line to the refrigerator OR you can cut off the flared fitting with a tube cutter and then use a compression fitting. Do not cut formed end from GE SmartConnect™ Refrigerator tubing.

•Shutoff valve to connect to the cold water line.

The shutoff valve should have a water inlet with a minimum inside diameter of 5/32″ at the point of connection to the COLD WATER LINE. Saddle-type shutoff valves are included in many water supply kits. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Write the model and serial numbers here Model # Serial # Escriba aquí el modelo y el número de serie Modelo # Serie #Before You Throw Away Your Old Refrigerator or Freezer RefrigerantsHOW to Connect Electricity About the temperature control dial About the fresh food compartment shelvesAbout the freezer compartment shelves About the storage drawersAbout storage drawer and cover removal About the automatic icemakerCare and cleaning of the refrigerator Rollers and Leveling Legs Refrigerator LocationClearances Before YOU Begin What YOU will NeedShut OFF the Main Water Supply and Unplug Refrigerator Drill the Hole for the ValveFasten the Shutoff Valve Route the TubingConnect the Tubing to the Refrigerator Connect the Tubing to RefrigeratorTurn the Water On AT Shutoff Valve Plug in the RefrigeratorImportant Notes Tools RequiredRemove the Freezer Door Before YOU StartReversing the Hardware Remove the Fresh Food DoorReversing the Door Handles Transfer door stopRE-HANGING the Doors Reversing the Door HandlesBefore you call for service… Normal operating soundsSee Care and cleaning See Installing the water lineFrost or ice crystals On frozen foodCustomer Warranty Consumer Product Ownership Registration For refrigerators installed in the U.S GE Consumer & Industrial GE Will Replace What GE Will Not CoverAvertissement Conservez CES Instructions Bouton de commande de la température Bacs de rangement Machine à glaçons automatique Soins et nettoyage de votre réfrigérateur Emplacement DU Réfrigérateur Alimentation D’EAU DE LA Machine À GlaçonsDégagements Roulettes ET Pieds DE NivellementAvant DE Commencer CE Dont Vous Aurez BesoinAcheminez LE Tuyau Fixez LE Robinet D’ARRÊTPercez UN Trou Pour LE Robinet Purgez LE Tuyau Branchez LE Tuyau AU RobinetBranchez LE Tuyau À Votre Réfrigérateur Fermez L’EAU AU Niveau DU Robinet D’ARRÊT Branchez Votre RéfrigérateurMettez EN Marche LA Machine À Glaçons Inversion DE L’OUVERTURE DES Portes Outils Requis Enlèvement DE LA Porte DU CongélateurInversion DE L’OUVERTURE DES Portes Suite Inversion DE LA Quincaillerie Inversion DES Poignées DE PorteInversion DES Poignées DE Porte Suite Transfert de la poignée de porte du réfrigérateur suiteRemontage DES Portes Remontage DES Portes SuitePage Bruits normaux de fonctionnement Avant d’appeler un réparateur… Bourdonnement Garantie DU Client Soutien au consommateur ¡ADVERTENCIA Antes de desechar su viejo refrigerador o congeladorInstrucciones SoporteGe.com InstruccionesSobre el dial de control de la temperatura Sobre los estantes del compartimiento de alimentos frescosDial de control de la temperatura en algunos modelos Estantes mediosSobre los estantes del compartimiento del congelador Sobre las gavetas de almacenamientoSobre la remoción de la gaveta de almacenamiento y cubierta Estante para las gavetas gemelasPara retirar Para reemplazarCuidado y limpieza del refrigerador Suministro DE Agua Hacia LA Máquina DE Hielos Ubicación DEL RefrigeradorÁrea Rodillos Y Patas NiveladorasEN Algunos Modelos Antes DE Iniciar QUÉ NecesitaSeleccione LA Ubicación DE LA Válvula Dirija LA TuberíaConecte LA Tubería LA Válvula Instale LA Válvula DE CierreConecte LA Tubería AL Refrigerador Abra LA Llave DEL Agua EN LA Válvula DE CierreConecte EL Refrigerador Inicie LA Máquina DE HieloNotas Importantes Herramientas Requeridas Retire LA Puerta DEL CongeladorRetire LA Puerta DE Alimentos Frescos Retire LA Puerta DE Alimentos FrescosCómo Invertir LAS Manijas DE LAS Puertas Traslade la manija de la puerta de alimentos frescosCómo Invertir LAS Manijas DE LA Puerta Cómo Volver a Colgar LAS PuertasMuy pequeños Sonidos normales de operaciónEs normal Los cubos son Soporte al consumidor Notas Instrucciones de Operación Por el período de GE reemplazará Ge.com Soporte al ConsumidorGarantías ampliadas GE Appliances Website

197D5226P005, PTS18SHSSS specifications

The GE PTS18SHSSS is a standout model in the world of refrigerators, known for its blend of advanced features, stylish design, and user-friendly functionality. This appliance is a top choice for families and individuals alike who seek efficient refrigeration solutions in their kitchens.

One of the key features of the GE PTS18SHSSS is its spacious interior, which offers ample storage capacity to accommodate a variety of food items and beverages. With adjustable shelves, it allows users to customize the internal layout according to their needs. The refrigerator efficiently utilizes every inch of space, making it an ideal option for both small and large kitchens.

The appliance is equipped with advanced temperature management technologies, ensuring consistent temperatures throughout the refrigerator and freezer compartments. This is particularly important for preserving the freshness of produce and extending the shelf life of perishable items. The model also boasts advanced cooling systems that minimize temperature fluctuations, resulting in better energy efficiency.

Another notable characteristic of the GE PTS18SHSSS is its energy-efficient performance. This model is designed to help users save on energy costs while being environmentally friendly. It typically carries an Energy Star certification, indicating that it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency.

In terms of design, the fridge features a sleek stainless steel finish that adds a modern touch to any kitchen. Its classic aesthetic, combined with easy-to-use controls, makes it not only visually appealing but also functional. The refrigerator's interior lighting is designed to illuminate the contents effectively, making it easier to find items, even in low light conditions.

The GE PTS18SHSSS is also equipped with convenient features such as adjustable humidity drawers, which help keep fruits and vegetables fresher for longer, as well as a built-in water filtration system that provides cleaner, great-tasting water. The design incorporates user-friendly controls, making temperature adjustments and settings simple and straightforward.

Overall, the GE PTS18SHSSS stands as a reliable and feature-rich refrigerator that meets the needs of modern households. Its combination of spacious storage, energy efficiency, and sleek design makes it a valuable addition to any kitchen. Whether you're storing groceries for a large family or occasionally entertaining guests, this model provides the functionality and reliability that consumers demand.
Top Page Image Contents