Loading the Bottom Rack

Preparing and Loading the Dishware (continued)

NOTE: Keep the vent on the tub’s right side clear by placing tall items such as plastic cutting boards and tall baking sheets on the bottom rack's left side, center, or back.

Place large	Figure 15
items in the	Figure 15
bottom rack.
Load pots
and pans
upside-down.
Figure 15
shows a
typical mixed
load in the
bottom rack.
	Figure 16

top rack spray	Figure 18
outlet and turn the
sprinkler
clockwise to lock
it into position as
shown in Figure
18.

NOTE: Keep the vent on the tub’s right side clear by placing tall items such as plastic cutting boards and tall baking sheets on the bottom rack's left side, center, or back.

Figure 19

Figure 16 shows the bottom rack load pattern for 10 place settings.

5.Place your extra tall item(s) in the bottom rack as shown in Figure 19.

(AHAM DW-1 10 Place Setting)

Figure 17

Figure 17 shows the bottom rack load pattern for 12 place settings.

(AHAM DW-1 12 Place Setting)

CAUTION

DISHWASHER DAMAGE: Reinstalling the top rack without removing the extra tall item sprinkler can damage the dishwasher. Do not reinstall the top rack with the sprinkler installed.

When the bottom rack is loaded, push it into the dishwasher.

To Load Extra Tall Items:

1.Remove the empty top rack by pulling it out of the dishwasher until it stops rolling.

2.Pull the front of the rack upward and outward until the rollers are completely free of the roller guides. Set the top rack aside.

3.Push the roller guides back into the dishwasher.

4.Insert the Extra Tall Item Sprinkler into the

To remove the sprinkler and return the dishwasher to its normal condition:

1.Turn the sprinkler counterclockwise and remove it from the top rack spray outlet.

2.Retrieve the top rack.

3.Tilt the top rack upwards and position the top rack rollers onto the roller guides.

4.Continue pushing the top rack until the rollers are on the guides.

5.Push the top rack into the dishwasher.