Operating the Dishwasher
Selecting Dishwasher Options
The factory default settings for all options should provide good results.
Options Selections
You can access the available options in the Options Step Down Menu as follows:
Delay Start
This option allows you to delay the start of the selected cycle for up to 24 hours in 30 minute increments.
NOTE:In the Options Step Down Menu you can return to the main menu at any time by pressing the START button.
1.Open the dishwasher door far enough to expose the control panel.
2.Press the ON/OFF button.
3.Press the MENU/OK button once to display the Delay Start option.
4.Press the + or – button until the display shows the desired amount of delay time.
5.After selecting the desired amount of delay time, you must press the MENU/OK button to save the setting. The display will indicate “Value Stored” and return to the main menu. If you did not select a delay time, press the START button to return to the main menu.
6.Select the desired wash cycle by pressing the – or + buttons.
7.Close the door. When the time delay has elapsed, the dishwasher will start automatically and continue operating through the end of the selected cycle.
8.You can change the time delay and/or the wash cycle at any time during the delay.
PowerBoost
Reduces the time to complete the wash cycle by preheating.
NOTE: In the Options Step Down Menu, you can return to the main menu at any time by pressing the START button.
1.Open the dishwasher door far enough to expose the control panel.
2.Press the ON/OFF button.
3.Press the MENU/OK button twice to display the PowerBoost option.
(continued)
4.This option can be turned on or off by pressing the + button.
5.After selecting the + button to turn on PowerBoost, you must press the MENU/OK button to save the setting. The display will show “Value Stored” and return to the main menu. If you did not select the + button to change the current setting,
press the START button to return to the main menu.
6.You can now select the desired wash cycle by pressing the – or + buttons.
7.Press START and close the dishwasher door to begin the cycle.
Extra Drying
This option allows you to adjust the final rinse temperature to improve drying or to save energy.
NOTE: In the Options Step Down Menu you can return to the main menu at any time by pressing the START button
1.Open the dishwasher door far enough to expose the control panel.
2.Press the ON/OFF button.
3.Press the MENU/OK button three times to obtain the current drying program
4.Press the + or – buttons to step through the following options:
·Economy Drying – saves energy.
·Normal Drying – factory default setting.
·Extra Drying – improves the drying performance.
5.After selecting the desired drying option, you must press the MENU/OK button to save the setting. The display will show “Value Stored” and return to the main menu. If you did not select a different drying option, press the START button to return to the main menu.
6.Select the desired wash cycle by pressing the – or + buttons.
7.Press START and close the dishwasher door to begin the cycle.
11