Filling the Rinse Agent Dispenser

Adding Detergent and Rinse Agent (continued)

Rinse Agent

Always use a liquid rinse agent, even if your detergent contains a rinse agent or drying additive, to achieve proper drying and proper maintenance of your dishware and dishwasher.

The control display will indicate “Refill Rinse Agent” when the cup needs filling. After rinse agent is added, “Refill Rinse Agent” will disappear.

Filling the Detergent and Rinse Agent Dispenser

The detergent and rinse agent dispenser can be filled from two positions: the lowered position, with the dishwasher door fully open or the raised position, from a more comfortable posture with the dishwasher door half-open.

(Lowered Position)

1.Press the blue release button as shown in Figure 25 and lift the cover.

Figure 25

2.Add liquid rinse agent to the dispenser as shown in Figure 26a until the rinse agent reservoir is full.

Filling the Detergent Dispenser

(Lowered Position)

Figure 26

1.Fill the detergent cup as recommended in Table 1.

2.Slide the cover as shown in Figure 23, arrow 1 and press down firmly as shown in Figure 23, arrow 2 so that the cover snaps shut.

Figure 23

Opening the Detergent Dispenser Cover

(Lowered Position)

NOTE: Pressing down on the blue release tab will not open the cover.

1.Press the blue release tab into the dispenser as shown in Figure 24.

3. Return the rinse agent dispenser cover to its

shut position and press it firmly so that it

snaps shut.

NOTE: Figure 26b represents a completely

empty rinse agent reservoir.

4. Refill the rinse agent dispenser when the

rinse agent reservoir level indicator as

shown in Figure 26b begins to show a silver

background with black lines or when the

“Refill Rinse Agent” indicator appears on the

dishwasher control panel.

NOTE: After the rinse agent reservoir is filled

and the dishwasher door is shut, within a few

2. The cover will slide open to the left.

Figure 24

minutes the “Refill Rinse Agent” indicator will

turn off.