Water System Preparation

2.Measure this same distance from the top of the base grille to the closest “V” groove on the skirt. Use a knife to score down the “V” groove and break the skirt at the score line.

A. Grille and skirt assembly

B. Measured distance from above in Step 2

C. Score “V” groove

3.Slide the skirt onto the base grille.

4.Then attach the base grille to the cabinet with the two screws provided.

Please read before using the water system.

Immediately after installation, follow the steps below to make sure that the water system is properly cleaned.

1.Open the freezer door and turn off the ice maker. For Style 1, lift up the wire shutoff arm as shown. For Style 2, move the switch to the OFF (right) setting as shown. The On/Off switch is located on the top right side of the freezer compartment.

Style 1 – Non-Dispenser Models

Style 2 – Dispenser Models

NOTE: If your model has a base grille filter system, make sure the base grille filter is properly installed and the cap is in the horizontal position.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

2.Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser lever

(5 seconds on, 5 seconds off) for an additional 2 minutes. This will flush air from the filter and water dispensing system. Additional flushing may be required in some households.

NOTE: As air is cleared from the system, water may spurt out of the dispenser.

3.Open the freezer door and turn on the ice maker. For Style 1, lower the wire shutoff arm. For Style 2, move the switch to the ON (left) position.

■Allow 24 hours to produce the first batch of ice.

■Discard the first three batches of ice produced.

■Depending on your model, you may want to select the maximum ice feature to increase the production of ice.

Complete Installation

1.Turn the water supply line valve to the “Open” position.

2.Turn the refrigerator switch to the ON position. See “Power On/Off Switch” in the Use & Care Guide for instructions. Wait a few minutes. Check the water line connections for leaks.

3.Remove all boxes, parts packages and packing materials from the interior of the refrigerator. See the “Cleaning” section in the Use & Care Guide for instructions. Remove the protective film and cardboard from the grille and doors or door frame, depending on your model.

4.Install the shelves and bins in the refrigerator and freezer compartments.

5.The controls are preset at the factory to the midpoint setting. Check to be sure that the compressor is operating properly and that all the lights are working.

6.Flush the water system before use. See “Water System Preparation.”

To get the most efficient use from your new built-in refrigerator, read your Use & Care Guide. Keep Installation Instructions and Use & Care Guide near the built-in refrigerator for easy reference.

2327570A, KBUDT4255E, KBUDT4855E, KBUDT4265E, KBUDT4875E specifications

Thermador is a name synonymous with luxury and innovation in the kitchen appliance industry. Among its premier offerings are a range of under-counter wine preservation and refrigeration units like the KBUIT4275E, KBUIT4855E, KBUDT4275E, KBUIT4255E, and others that promise to elevate both functionality and aesthetics in your home.

The KBUIT4275E and KBUIT4855E are designed with seamless integration in mind, offering a sleek, modern look that fits effortlessly into any kitchen decor. These units have adjustable shelving, allowing for customized storage options for various bottle sizes, accommodating everything from standard wine bottles to larger formats.

Featuring advanced cooling technologies, the Thermador wine units maintain optimal temperature and humidity levels, essential for preserving wine quality. With dual temperature zones available in models like the KBUIT4855E, wine enthusiasts can store both red and white wines at their ideal serving temperatures simultaneously.

One of the standout features across the KBUIT and KBUDT lines is the use of innovative whispering quiet technology, reducing noise levels to ensure that your wine storage remains a serene part of your culinary space. Additionally, their UV-blocking glass doors protect your wine from harmful light exposure, preserving its integrity for longer periods.

For those who prioritize convenience, models like the KBUDT4255E come equipped with a soft-close feature, ensuring the doors gently close without slamming, which not only adds to the longevity of the unit but also enhances the user experience.

Thermador also integrates Smart Home technology in some models, allowing users to control temperature settings through their smartphones. This kind of technological advancement appeals to tech-savvy homeowners seeking seamless connectivity in their kitchen.

The aesthetic design is equally compelling, with options for panel-ready finishes that enable these wine units to blend seamlessly with existing cabinetry, offering a custom look.

In conclusion, Thermador’s under-counter wine preservation and refrigeration units are not just appliances; they are a fusion of state-of-the-art technology, user-friendly features, and elegant design. Whether choosing the KBUIT4265E or the KBUDT4875E, wine lovers can appreciate the careful craftsmanship and attention to detail that goes into every model, ensuring an exquisite experience with wine storage and preservation.