GE 162D7740P005 dimensions Problem Solver

Page 19

PROBLEM

POSSIBLE CAUSE

 

 

FOODS DRY OUT

• Foods not covered, wrapped or sealed properly.

 

 

FRESH FOOD OR

• Temperature control not set cold enough. Refer to Temperature Control section.

FROZEN FOOD STORAGE

• Warm weather—frequent door openings.

COMPARTMENT

• Door left open for too long a time.

TEMPERATURE TOO WARM

• Package holding door open or blocking air duct in frozen food storage compartment.

 

 

 

FROST OR ICE CRYSTALS

• Door may have been left ajar or package holding door open.

ON FROZEN FOOD

• Too frequent or too long door openings.

 

 

• Frost within package is normal.

 

 

AUTOMATIC ICEMAKER

• Icemaker feeler arm is in STOP (up) position.

DOES NOT WORK

• Water supply turned off or not connected.

(on some models)

• Frozen food storage compartment too warm.

 

 

• Piled up cubes in the storage bin may cause icemaker to shut off prematurely.

 

Remove storage bin from frozen food storage compartment and level cubes by hand.

 

 

CUBES TOO SMALL

• Water shutoff valve connecting refrigerator to home water line may be clogged.

 

 

SLOW ICE CUBE FREEZING

• Door may have been left ajar.

 

• Turn temperature control to colder setting.

 

 

ICE CUBES HAVE

• Ice storage bin needs to be emptied, washed and old cubes need to be discarded.

ODOR/TASTE

• Unsealed packages in refrigerator and/or frozen food storage compartments may be

 

 

transmitting odor/taste to ice cubes.

 

• Interior of refrigerator needs cleaning. Refer to Care and Cleaning section.

 

 

MOISTURE FORMS ON

• Not unusual during periods of high humidity. To help prevent rust, wipe surface dry

CABINET SURFACE

and make sure the anti-moisture switch is not set at the anti-moisture setting.

BETWEEN THE DOORS

• Move the anti-moisture switch to the moisture setting.

 

 

 

MOISTURE COLLECTS

• Too frequent or too long door openings.

INSIDE

• In humid weather, air carries moisture into refrigerator when doors are opened.

 

 

 

REFRIGERATOR HAS ODOR

• Foods with strong odors should be tightly covered.

 

• Check for spoiled food.

 

• Interior needs cleaning. Refer to Care and Cleaning section.

 

• Defrost water drainage system needs cleaning.

 

• Keep open box of baking soda in refrigerator; replace every three months.

 

 

HOT AIR FROM BOTTOM

• Normal air flow cooling motor. In the refrigerator process, it is normal that heat

OF REFRIGERATOR

be expelled in the area under the refrigerator. Some floor coverings will discolor

 

at these normal and safe operating temperatures. Your floor covering supplier

 

should be consulted if you object to this discoloration.

 

 

FOOD FREEZING IN

• Move the food away from the air vent (near the controls).

THE REFRIGERATOR

• Turn down the fresh food control.

 

 

 

ORANGE GLOW IN

• An orange glow is sometimes seen in the frozen food storage compartment when the

THE FROZEN FOOD

defrost heater is on. This is normal.

STORAGE COMPARTMENT

 

 

 

19

Problem Solver

Page 18 Page 20
Image 19
Page 18 Page 20
Contents UseandCare& Installation Guide Help US Help YOU… Important Safety InstructionsCFC-FREE Refrigerant No Defrosting Temperature ControlAnti-Moisture Switch How to Test TemperaturesShelves Beverage Rack AccessoriesQuick Store Bin on some models Condiment CaddyStorage Drawers Automatic Icemaker Water Supply Kit Icemaker Accessory KitCare and Cleaning Half-Width Drawer with Plastic Cover on some models Light Bulb ReplacementCare Full-Width Drawer with Plastic Cover on some modelsPreparation IMPORTANT…Please Read Carefully Installation RequirementsElectrical Requirements Use of Adapter Plug on some modelsShut OFF the Main Water Supply Water Line InstallationWarranty Information What YOU will NeedSET the Icemaker Feeler ARM to the on Down Position Connect the Copper Tubing to the Shutoff ValveTurn the Water on AT the Shutoff Valve Turn on the Water and Flush OUT the TubingRemove Fresh Food Door Reversing the Door SwingRemove the Doors Tools RequiredTransfer TOP Hinge to the Left Reverse Hardware on CabinetTransfer Door Stops To remove handle… When reinstalling handle…Reverse Door Handles Transfer Fresh Food Door Handle to the RightRehang Frozen Food Storage Compartment Door Rehang Fresh Food DoorNormal Operating Sounds QUESTIONS? USE this Problem SolverProblem Solver Page Guía de uso y de cuidado Refrigerante SIN CFC Ayudenos a AYUDARLE…Cómo comprobar la temperatura Siga Estas InstruccionesControles DE Temperatura Interruptor anti-humedadEntrepaños Recipientes Quick Store en algunos modelos AccesoriosCajita de condimentos Estante de bebidas Gavetas Para Guardar Automático para hacer hielo Maquina Automatica DE Hacer HieloCuidado Y Limpieza Para sacar la gaveta Cambio de focoPara sacar la cubierta Preparacion IMPORTANTE…Por favor lea cuidadosamente Requerimientos DE LA InstalacionRequerimientos eléctricos Uso de un adaptador en algunos modelosInformacion Sobre LA Garantia Instalacion DE LA Tuberia DEL AguaPrecaucion QUE SE NecesitaDesplace EL Refrigerador Nuevamente Contra LA Pared Abra EL Agua EN LA Llave DE PasoCuando cambie el modo de apertura de la puerta Para Cambiar EL Modo DE Apertura DE LA PuertaSaque LAS Puertas Herramientas NecesariasTransfiera LOS Frenos DE LA Puerta Cambie LA Ferreteria DEL CompartimientoCuando vuelva a instalar el tirador Invertir LOS Tiradores DE LA PuertaPara sacar el tirador Después de haber Sacado el tiradorDe la bisagra con Instalar la clavijaApriete los tornillos de la bisagra superior Sonidos Normales DE LA Operacion ¿PREGUNTAS? USE Esta Hoja Para Solucionar LOS ProblemasDispositivo para hacer hielo en algunos modelos Solucionar los problemas Refrigerador Solucionar LOS Problemas

162D7740P005 specifications

The GE 162D7740P005 is a key component in the spectrum of industrial-grade electronic controls, renowned for its reliability and performance in various applications. Manufactured by General Electric, this device exemplifies the company’s commitment to delivering advanced technological solutions that enhance operational efficiency and productivity.

One of the main features of the GE 162D7740P005 is its robust construction, which is designed to withstand harsh industrial environments. The device is encapsulated in a durable housing that protects it from dust, moisture, and other external threats, making it suitable for use in factories, power plants, and other challenging settings. This durability ensures a long operational life, reducing maintenance costs and downtime.

In terms of technology, the GE 162D7740P005 is equipped with advanced electronic circuitry that enables precise control and monitoring of various processes. It boasts a high degree of accuracy, which is critical for applications that require exact measurements and responses to varying conditions. This precision is complemented by the device’s ability to integrate seamlessly with other electronic systems, facilitating communication and coordination among different equipment.

Another characteristic that sets the GE 162D7740P005 apart is its versatility. The device can be utilized in a wide range of applications, including automation systems, HVAC controls, and motor control centers. This flexibility makes it a valuable asset for industries seeking to optimize their operations and improve task efficiency.

Additionally, the GE 162D7740P005 incorporates user-friendly features such as intuitive interface options and configurable settings. This design ensures that operators can easily interact with the device, making adjustments as needed without extensive training. The availability of comprehensive documentation and support further enhances user experience, allowing for quick troubleshooting and setup.

Overall, the GE 162D7740P005 is a testament to General Electric’s prowess in producing reliable and efficient industrial controls. With its durable construction, advanced technology, versatility, and user-friendly interface, it stands as a preferred choice for businesses aiming to leverage high-performance electronic solutions in their operations. Whether you're looking to optimize control processes or enhance automation capabilities, the GE 162D7740P005 offers the features and characteristics necessary to meet those goals.
Top Page Image Contents