Installation Requirements

IMPORTANT…Please Read Carefully

Electrical Requirements

WARNING: HOW TO AVOID ACCIDENTS TO CHILDREN. WHEN DISCARDING AN OLD REFRIGERATOR OR FREEZER BE CERTAIN TO MAKE THE LOCK UNUSABLE. IF POSSIBLE, REMOVE THE DOORS AND DISCARD SEPARATELY. DO NOT ATTEMPT TO STAND ON TOP OF YOUR APPLIANCE. IT IS NOT DESIGNED FOR SUCH USE AND YOU COULD INJURE YOURSELF OR DAMAGE THE APPLIANCE BY SUCH ABUSE. CHILDREN SHOULD NOT BE ALLOWED TO PLAY WITH THE APPLIANCE OR TAMPER WITH THE CONTROLS.

The refrigerator should always be plugged into its own individual electrical outlet—Please refer to the rating plate on the refrigerator for the correct voltage and frequency. This is recommended for best performance and to prevent overloading house wiring circuits, which could cause a fire hazard from overheated wires.

Preparation

How to Connect Electricity

For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a three-prong (grounding) plug which mates with a standard three-prong

(grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where an ungrounded wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded three-prong wall outlet.

Insure proper ground exists before using.

If the product plug does not fit your outlet, the product should be fitted with a new plug.

IMPORTANT: The refitting of electric plugs and cables should be done by a qualified technician or service agent.

If the power supply cord becomes damaged, it must be replaced by a qualified service agent in order to avoid a safety hazard.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD.

	Use of Adapter Plug (on some models)
	Because of potential safety	Temporary method
	hazards under certain conditions,	Temporary method
	hazards under certain conditions,
	we strongly recommend against	Align large prongs
	use of an adapter plug. However,	with slots
	if you still elect to use an adapter,
	where local codes permit, a
	TEMPORARY CONNECTION	Insure proper
	may be made to a properly	Insure proper
	may be made to a properly	grounding and firm
	grounded two-prong wall outlet by	grounding and firm
	grounded two-prong wall outlet by	connection exist before
	use of an adapter.	connection exist before
	use of an adapter.	using.
		using.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

CAUTION: Attaching adapter ground terminal to wall outlet cover screw does not ground the appliance unless cover screw is metal, and not insulated, and wall outlet is grounded through house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

When disconnecting the power cord from the adapter, always hold the adapter with one hand while pulling the plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

Should the adapter ground terminal break, DO NOT USE the appliance until a proper ground has again been established.

Installation

162D7740P005 specifications

The GE 162D7740P005 is a key component in the spectrum of industrial-grade electronic controls, renowned for its reliability and performance in various applications. Manufactured by General Electric, this device exemplifies the company’s commitment to delivering advanced technological solutions that enhance operational efficiency and productivity.

One of the main features of the GE 162D7740P005 is its robust construction, which is designed to withstand harsh industrial environments. The device is encapsulated in a durable housing that protects it from dust, moisture, and other external threats, making it suitable for use in factories, power plants, and other challenging settings. This durability ensures a long operational life, reducing maintenance costs and downtime.

In terms of technology, the GE 162D7740P005 is equipped with advanced electronic circuitry that enables precise control and monitoring of various processes. It boasts a high degree of accuracy, which is critical for applications that require exact measurements and responses to varying conditions. This precision is complemented by the device’s ability to integrate seamlessly with other electronic systems, facilitating communication and coordination among different equipment.

Another characteristic that sets the GE 162D7740P005 apart is its versatility. The device can be utilized in a wide range of applications, including automation systems, HVAC controls, and motor control centers. This flexibility makes it a valuable asset for industries seeking to optimize their operations and improve task efficiency.

Additionally, the GE 162D7740P005 incorporates user-friendly features such as intuitive interface options and configurable settings. This design ensures that operators can easily interact with the device, making adjustments as needed without extensive training. The availability of comprehensive documentation and support further enhances user experience, allowing for quick troubleshooting and setup.

Overall, the GE 162D7740P005 is a testament to General Electric’s prowess in producing reliable and efficient industrial controls. With its durable construction, advanced technology, versatility, and user-friendly interface, it stands as a preferred choice for businesses aiming to leverage high-performance electronic solutions in their operations. Whether you're looking to optimize control processes or enhance automation capabilities, the GE 162D7740P005 offers the features and characteristics necessary to meet those goals.