GE 162D7740P005 dimensions Help US Help YOU…, CFC-FREE Refrigerant, Important Safety Instructions

Page 2

HELP US HELP YOU…

Read this guide carefully.

It is intended to help you operate and maintain your new refrigerator properly. Keep it handy for answers to your questions.

If you received a damaged refrigerator…

Immediately contact the dealer (or builder) that sold you the refrigerator.

Save time and money. Before you request service…

Check the Problem Solver. It lists minor operating problems that you can correct yourself.

Write down the model and serial numbers.

You’ll see them on a label on the left side, near the top of the fresh food compartment.

Model Number

Serial Number

Use these model and serial numbers in any correspondence or service calls concerning your refrigerator.

CFC-FREE REFRIGERANT

This refrigerator uses a new refrigerant that does not contain CFCs (chlorofluorocarbons). CFCs are believed to harm the stratospheric ozone.

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

WARNING—When using this appliance, always exercise basic safety precautions, including the following:

•Use this appliance only for its intended purpose as described in this Use and Care Guide.

•This refrigerator must be properly installed

in accordance with the Installation Instructions before it is used. See grounding instructions below and in Installation section.

WARNING—Connect to potable water supply only.

•Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

•Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or appliance end.

•When moving your refrigerator away from the wall, be careful not to roll over or damage the power cord.

•Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

2

•If your old refrigerator is still around the house but not in use, be sure to remove the doors. This will reduce the possibility of danger to children.

•After your refrigerator is in operation, do not touch the cold surfaces in the frozen food storage compartment, particularly when hands are damp or wet. Skin may adhere to these extremely cold surfaces.

•If your refrigerator has an automatic icemaker, avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. Do not place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

•Don’t refreeze frozen foods which have thawed completely. Food safety experts say:

‘‘…You may safely refreeze frozen foods that have thawed if they still contain ice crystals or if they are still cold—below 4°C (40°F).

‘‘…Thawed ground meats, poultry or fish that have any off-odor or off-color should not be refrozen and should not be eaten. Thawed ice cream should be discarded. If the odor or color of any food is poor or questionable, get rid of it. The food may be dangerous to eat.

‘‘…Even partial thawing and refreezing reduces the eating quality of foods, particularly fruits, vegetables and prepared foods. The eating quality of red meats is affected less than that of many other foods. Use refrozen foods as soon as possible to save as much of their eating quality as you can.’’

Page 1 Page 3
Image 2
Page 1 Page 3
Contents UseandCare& Installation Guide CFC-FREE Refrigerant Important Safety InstructionsHelp US Help YOU… How to Test Temperatures Temperature ControlAnti-Moisture Switch No DefrostingShelves Condiment Caddy AccessoriesQuick Store Bin on some models Beverage RackStorage Drawers Water Supply Kit Icemaker Accessory Kit Automatic IcemakerCare and Cleaning Full-Width Drawer with Plastic Cover on some models Light Bulb ReplacementCare Half-Width Drawer with Plastic Cover on some modelsPreparation Use of Adapter Plug on some models Installation RequirementsElectrical Requirements IMPORTANT…Please Read CarefullyWhat YOU will Need Water Line InstallationWarranty Information Shut OFF the Main Water SupplyTurn on the Water and Flush OUT the Tubing Connect the Copper Tubing to the Shutoff ValveTurn the Water on AT the Shutoff Valve SET the Icemaker Feeler ARM to the on Down PositionTools Required Reversing the Door SwingRemove the Doors Remove Fresh Food DoorTransfer Door Stops Reverse Hardware on CabinetTransfer TOP Hinge to the Left Transfer Fresh Food Door Handle to the Right When reinstalling handle…Reverse Door Handles To remove handle…Rehang Fresh Food Door Rehang Frozen Food Storage Compartment DoorQUESTIONS? USE this Problem Solver Normal Operating SoundsProblem Solver Page Guía de uso y de cuidado Ayudenos a AYUDARLE… Refrigerante SIN CFCInterruptor anti-humedad Siga Estas InstruccionesControles DE Temperatura Cómo comprobar la temperaturaEntrepaños Cajita de condimentos Estante de bebidas AccesoriosRecipientes Quick Store en algunos modelos Gavetas Para Guardar Maquina Automatica DE Hacer Hielo Automático para hacer hieloCuidado Y Limpieza Para sacar la cubierta Cambio de focoPara sacar la gaveta Preparacion Uso de un adaptador en algunos modelos Requerimientos DE LA InstalacionRequerimientos eléctricos IMPORTANTE…Por favor lea cuidadosamenteQUE SE Necesita Instalacion DE LA Tuberia DEL AguaPrecaucion Informacion Sobre LA GarantiaAbra EL Agua EN LA Llave DE Paso Desplace EL Refrigerador Nuevamente Contra LA ParedHerramientas Necesarias Para Cambiar EL Modo DE Apertura DE LA PuertaSaque LAS Puertas Cuando cambie el modo de apertura de la puertaCambie LA Ferreteria DEL Compartimiento Transfiera LOS Frenos DE LA PuertaDespués de haber Sacado el tirador Invertir LOS Tiradores DE LA PuertaPara sacar el tirador Cuando vuelva a instalar el tiradorApriete los tornillos de la bisagra superior Instalar la clavijaDe la bisagra con Dispositivo para hacer hielo en algunos modelos ¿PREGUNTAS? USE Esta Hoja Para Solucionar LOS ProblemasSonidos Normales DE LA Operacion Solucionar los problemas Solucionar LOS Problemas Refrigerador

162D7740P005 specifications

The GE 162D7740P005 is a key component in the spectrum of industrial-grade electronic controls, renowned for its reliability and performance in various applications. Manufactured by General Electric, this device exemplifies the company’s commitment to delivering advanced technological solutions that enhance operational efficiency and productivity.

One of the main features of the GE 162D7740P005 is its robust construction, which is designed to withstand harsh industrial environments. The device is encapsulated in a durable housing that protects it from dust, moisture, and other external threats, making it suitable for use in factories, power plants, and other challenging settings. This durability ensures a long operational life, reducing maintenance costs and downtime.

In terms of technology, the GE 162D7740P005 is equipped with advanced electronic circuitry that enables precise control and monitoring of various processes. It boasts a high degree of accuracy, which is critical for applications that require exact measurements and responses to varying conditions. This precision is complemented by the device’s ability to integrate seamlessly with other electronic systems, facilitating communication and coordination among different equipment.

Another characteristic that sets the GE 162D7740P005 apart is its versatility. The device can be utilized in a wide range of applications, including automation systems, HVAC controls, and motor control centers. This flexibility makes it a valuable asset for industries seeking to optimize their operations and improve task efficiency.

Additionally, the GE 162D7740P005 incorporates user-friendly features such as intuitive interface options and configurable settings. This design ensures that operators can easily interact with the device, making adjustments as needed without extensive training. The availability of comprehensive documentation and support further enhances user experience, allowing for quick troubleshooting and setup.

Overall, the GE 162D7740P005 is a testament to General Electric’s prowess in producing reliable and efficient industrial controls. With its durable construction, advanced technology, versatility, and user-friendly interface, it stands as a preferred choice for businesses aiming to leverage high-performance electronic solutions in their operations. Whether you're looking to optimize control processes or enhance automation capabilities, the GE 162D7740P005 offers the features and characteristics necessary to meet those goals.
Top Page Image Contents