GE 162D7740P005 dimensions QUESTIONS? USE this Problem Solver, Normal Operating Sounds

Page 18

 

 

 

QUESTIONS?

 

 

 

 

USE THIS PROBLEM SOLVER

 

 

 

 

 

 

 

 

 

 

PROBLEM

POSSIBLE CAUSE

 

 

 

 

 

 

REFRIGERATOR DOES

• May be in defrost cycle when motor does not operate for about 30 minutes.

 

 

NOT OPERATE

• Temperature control is in “0” position.

 

 

 

 

 

 

 

 

• If interior light is not on, refrigerator may not be plugged in at wall outlet.

 

 

 

 

• If plug is secure and the refrigerator still fails to operate, plug a lamp or a small

 

 

 

 

appliance into the same outlet to determine if there is a tripped circuit breaker or

 

 

 

 

burned-out fuse.

 

 

 

 

 

 

MOTOR OPERATES

• Modern refrigerators with more storage space and a larger frozen food storage

 

 

FOR LONG PERIODS

compartment require more operating time.

 

 

 

 

• Normal when refrigerator is first delivered to your home—usually requires

 

 

 

 

24 hours to completely cool down.

 

 

 

 

• Large amounts of food placed in refrigerator to be cooled or frozen.

 

 

 

 

• Hot weather—frequent door openings.

 

 

 

 

• Door left open.

 

 

 

 

• Temperature control is set too cold. Refer to Temperature Control section.

 

 

 

 

• Grille and condenser need cleaning. Refer to Care and Cleaning section.

 

 

 

 

 

 

MOTOR STARTS AND

• Temperature control starts and stops motor to maintain even temperatures.

 

 

STOPS FREQUENTLY

 

 

 

 

 

 

 

VIBRATION OR RATTLING

• If refrigerator vibrates, more than likely it is not resting solidly on the floor.

 

 

 

 

The front leveling legs need adjusting, or floor is weak or uneven. Refer to

 

 

 

 

Rollers in the Preparation section.

 

 

 

 

• If dishes vibrate on shelves, try moving them. Slight vibration is normal.

 

 

 

 

 

 

NORMAL OPERATING SOUNDS

These sounds are normal and do not indicate a need for service.

The new high efficiency compressor runs faster and will have a higher pitch hum or pulsating sound while operating.

Sizzling sound in the frozen food storage compartment during the defrost cycle, caused by frost thawing and draining.

Defrost timer and refrigerator control click on and off.

The fan circulating air inside the frozen food storage compartment which keeps the temperatures throughout.

Water dropping on the defrost heater causing a sizzling, hissing or popping sound during the defrost cycle.

The flow of refrigerant through the frozen food storage compartment cooling coils sounds like boiling water or a gurgling noise.

Cracking or popping of cooling coils caused by expansion and contraction during defrost and refrigeration following defrost.

Water dripping as it melts from the evaporator and flows to the drain pan during the defrost cycle.

Icemaker (on some models): The icemaker water valve will buzz when the icemaker fills with water. If the feeler arm is in the ON (down) position it will buzz even if it has not yet been hooked up to water. Keeping the feeler arm in the ON (down) position before it is hooked up to water can damage the icemaker. To prevent this, raise

the feeler arm to the STOP (up) position. This will stop the buzzing.

The sound of cubes dropping into the bin and water running in pipes as icemaker refills.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents UseandCare& Installation Guide Important Safety Instructions Help US Help YOU…CFC-FREE Refrigerant How to Test Temperatures Temperature ControlAnti-Moisture Switch No DefrostingShelves Condiment Caddy AccessoriesQuick Store Bin on some models Beverage RackStorage Drawers Water Supply Kit Icemaker Accessory Kit Automatic IcemakerCare and Cleaning Full-Width Drawer with Plastic Cover on some models Light Bulb ReplacementCare Half-Width Drawer with Plastic Cover on some modelsPreparation Use of Adapter Plug on some models Installation RequirementsElectrical Requirements IMPORTANT…Please Read CarefullyWhat YOU will Need Water Line InstallationWarranty Information Shut OFF the Main Water SupplyTurn on the Water and Flush OUT the Tubing Connect the Copper Tubing to the Shutoff ValveTurn the Water on AT the Shutoff Valve SET the Icemaker Feeler ARM to the on Down PositionTools Required Reversing the Door SwingRemove the Doors Remove Fresh Food DoorReverse Hardware on Cabinet Transfer TOP Hinge to the LeftTransfer Door Stops Transfer Fresh Food Door Handle to the Right When reinstalling handle…Reverse Door Handles To remove handle…Rehang Fresh Food Door Rehang Frozen Food Storage Compartment DoorQUESTIONS? USE this Problem Solver Normal Operating SoundsProblem Solver Page Guía de uso y de cuidado Ayudenos a AYUDARLE… Refrigerante SIN CFCInterruptor anti-humedad Siga Estas InstruccionesControles DE Temperatura Cómo comprobar la temperaturaEntrepaños Accesorios Recipientes Quick Store en algunos modelosCajita de condimentos Estante de bebidas Gavetas Para Guardar Maquina Automatica DE Hacer Hielo Automático para hacer hieloCuidado Y Limpieza Cambio de foco Para sacar la gavetaPara sacar la cubierta Preparacion Uso de un adaptador en algunos modelos Requerimientos DE LA InstalacionRequerimientos eléctricos IMPORTANTE…Por favor lea cuidadosamenteQUE SE Necesita Instalacion DE LA Tuberia DEL AguaPrecaucion Informacion Sobre LA GarantiaAbra EL Agua EN LA Llave DE Paso Desplace EL Refrigerador Nuevamente Contra LA ParedHerramientas Necesarias Para Cambiar EL Modo DE Apertura DE LA PuertaSaque LAS Puertas Cuando cambie el modo de apertura de la puertaCambie LA Ferreteria DEL Compartimiento Transfiera LOS Frenos DE LA PuertaDespués de haber Sacado el tirador Invertir LOS Tiradores DE LA PuertaPara sacar el tirador Cuando vuelva a instalar el tiradorInstalar la clavija De la bisagra conApriete los tornillos de la bisagra superior ¿PREGUNTAS? USE Esta Hoja Para Solucionar LOS Problemas Sonidos Normales DE LA OperacionDispositivo para hacer hielo en algunos modelos Solucionar los problemas Solucionar LOS Problemas Refrigerador

162D7740P005 specifications

The GE 162D7740P005 is a key component in the spectrum of industrial-grade electronic controls, renowned for its reliability and performance in various applications. Manufactured by General Electric, this device exemplifies the company’s commitment to delivering advanced technological solutions that enhance operational efficiency and productivity.

One of the main features of the GE 162D7740P005 is its robust construction, which is designed to withstand harsh industrial environments. The device is encapsulated in a durable housing that protects it from dust, moisture, and other external threats, making it suitable for use in factories, power plants, and other challenging settings. This durability ensures a long operational life, reducing maintenance costs and downtime.

In terms of technology, the GE 162D7740P005 is equipped with advanced electronic circuitry that enables precise control and monitoring of various processes. It boasts a high degree of accuracy, which is critical for applications that require exact measurements and responses to varying conditions. This precision is complemented by the device’s ability to integrate seamlessly with other electronic systems, facilitating communication and coordination among different equipment.

Another characteristic that sets the GE 162D7740P005 apart is its versatility. The device can be utilized in a wide range of applications, including automation systems, HVAC controls, and motor control centers. This flexibility makes it a valuable asset for industries seeking to optimize their operations and improve task efficiency.

Additionally, the GE 162D7740P005 incorporates user-friendly features such as intuitive interface options and configurable settings. This design ensures that operators can easily interact with the device, making adjustments as needed without extensive training. The availability of comprehensive documentation and support further enhances user experience, allowing for quick troubleshooting and setup.

Overall, the GE 162D7740P005 is a testament to General Electric’s prowess in producing reliable and efficient industrial controls. With its durable construction, advanced technology, versatility, and user-friendly interface, it stands as a preferred choice for businesses aiming to leverage high-performance electronic solutions in their operations. Whether you're looking to optimize control processes or enhance automation capabilities, the GE 162D7740P005 offers the features and characteristics necessary to meet those goals.
Top Page Image Contents