Thermador HS-HST-HSB 67/8, Wall Mount Installation HST series Hood only see Figure

Wall Mount Installation - HST series Hood only (see Figure 6-7-8)

1. Hood Installation Height After the hood installation height has been determined draw a horizontal line at a distance above the cooktop equal to the desired hood installation height plus 16 1/2”. This line is the mounting location of the wooden bracket shipped with the hood.

2. Find the centerline of the cooktop. Draw a vertical line along this centerline up to the horizontal line drawn in step 1.

3. The HST series hoods are
mounted to the wall using a
wooden bracket shipped with
the hood. Remove the bracket
from the hood by removing two
shipping screws. Mark the	Figure 6
centerline of the bracket.
4. Find studs behind the drywall
by tapping the wall or using a
stud finder. Locate one stud on
either side of the cooktop
centerline to use for mounting
the wooden bracket as shown
in Figure 6.

5.Align the top of the wood bracket along the horizontal line drawn in step 1. Align the centerlines of the bracket and cooktop.

6.Drill a 3” deep 1/8” tap hole through the wooden bracket, drywall, and into the stud.

7.Use 2-4 (6mm x 80 mm) screws to attach the bracket to the wall

as shown in Figure 7. For	Figure 7
support of longer hoods, use
Page 12

6

67/8”