BEFORE INSTALLING HOOD
TYPICAL INSTALLATION
The hoods are designed for either vertical or horizontal discharge as shown in Figure A and B respectively.
The height from the countertop to the bottom of the hood is 30" to 36”.These hoods are not recommended to be used over indoor grills.
DUCTING
Provide a Round Duct having a diameter of 8” (see Figure A and B for location and Figure 1 for location on wall or cabinet bottom).
Install a 1/2” conduit from the service panel long enough to reach the hood once it is installed.
Power supply must be rated for 120V 60Hz, 15 amps (minimum).
Note - Horizontal Discharge: The Transition for this discharge direction is not supplied and must be purchased separately.
Page 9