Cleveland Range OES-6.08 manual To use the Tray Timer

Page 28

B. Tray Timer

•The MINI oven must be ON and operating in a cooking mode before the Tray Timer can be set.

•The Tray Timer function provides up to twenty (20) timers for mixed oven loads to keep track of the optimum finish for each different dish.

•The Tray Timer is NOT a programmable function.

•The Tray Timer icon does NOT appear while the Tray Timer is in use.

•There is no connection between individual Tray Timers and the position or placement of food in the MINI.

•Tray Timers do not stop counting down while the MINI door is open.

•While this allows great flexibility in use, careful planning is strongly recommended to make best use of the Tray Timer function.

To use the Tray Timer:

1.Select Mode: Steam, Combi, Hot Air, or Retherm.

2.Set the timer to Continuous (- - : - -) before using the Tray Timer.

3.Set the temperature.

4.START the selected cooking mode with the Start/Stop key.

5.The oven on icon must appear before the Tray Timer can be set.

6.Press the Smart Key.

7.Various options appear in the display.

8.Select Tray Timer with the Selector Dial.

9.Confirm by pressing the Smart Key.

10.The display shows the nominal (set) time on the left, and time remaining on the right.

Timer No.

Set Time

Time Remaining

Timer 1:

00:00

00:00

Timer 2:

00:00

00:00

Timer 3:

00:00

00:00

11.Select the desired Tray Timer (Timer 7, for example) with the Selector Dial.

12.Use the scroll right (arrow) key to navigate to the nominal time.

13.Set the Tray Timer with the Selector Dial.

14.Use the scroll left (arrow) key to navigate back to the Tray Timer column.

15.Select the next desired Tray Timer with the Selector Dial.

16.Repeat steps 12, 13, and 14 as desired, to set up to twenty (20) individual Tray Timers.

17.The Tray Timers START COUNTING DOWN as soon as a time greater than 0:00 is entered.

18.Exit the Tray Timer function with the Smart Key, or Start/Stop key.

19.When the set time on a Tray Timer has elapsed, the Signal Tone sounds.

20.Press the Start/Stop key or open the door.

21.Take appropriate action (check food, load, unload, stir, etc.)

22.Use steps 6-18 to reset an individual Tray Timer to 0:00. The countdown and Signal Tone for that Tray Timer stops and makes that Tray Timer available for use.

23.Individual Tray Timers may be added or adjusted as needed without affecting the other Tray Timers by using steps 6-18 without changing the time to 0:00.

NOTE: The Tray Timers CONTINUE TO COUNT DOWN after a Signal Tone sounds, and the Start/Stop key is pressed and / or the oven door is opened.

22

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operator’s Manual Part No. OES6.08-OPM Rev. A, 9/07For Your Safety Keep this Manual for ReferenceCleveland Statement of Policies Free Start-Up Program Your Mini in ActionOPERATOR’S Manual MiniMini Setup TroubleshootingAT the END of the DAY or Shift Emergency OperationOperational Safety IntroductionCleaning and Maintenance Service and Service RecordsNever Operator TrainingDoor Handle and Door Switch Main External Power SwitchGeneral Operation Inspecting the Mini Before Switching on START-UP and Shutdown InstructionsStart-up Instructions Shutdown InstructionsPRE-HEATING the Mini Inspecting the Cooking CompartmentBlocked or slow drain may cause Core Temperature Sensor Error Messages FunctionExterior Views Product Views and OperationHOT Always PRE-HEAT Quick Start Guide Control Panel Basic OperationControl Panel Control Panel Detail View Cooking with the Mini Using Steam Mode Steam ModeSee , Advanced Functions for details Combi Mode Using Combi ModeHot Air Mode Using Hot Air ModeRetherm Mode Using Rethermalization Mode Measuring the Core Temperature Measuring the Core Temperature Delta-T Cooking Delta T cooking requires use of the Core Temperature SensorTo use Delta-T Cooking Cook & Hold RecommendationsLT Cooking Cooking at Low Temperatures Principle of Cook & HoldCrisp & Tasty Function Demoisturizing Advanced FunctionsTo use Crisp & Tasty Tray Timer To use the Tray TimerPre-Heat Vapor ReductionKey Lock RecommendationsAdd Moisture Manually To Unlock when the Smart Key is also lockedTo Unlock Overnight Cooking Cool DownUsing MULTI-STEP Recipes Creating a Multi-Step RecipeRecording a Recipe in Real-Time To enter the first stepPage Entering a New Recipe in the Cookbook Using the CookbookExecuting a Recipe from the Cookbook Integrating Pre-Heating into a Recipe Copying a RecipeDeleting a Recipe Changing a Step of a RecipeAdding a Step to a Recipe Inserting a Step into a RecipeDeleting a Step from a Recipe Save Recipes to Memory Load Recipes from MemoryAdding an Action Prompt to a Recipe To Overwrite a Press & Go Key Using Press & GOTo Execute a recipe with Press & Go Cleaning the Oven Chamber Cleaning GeneralSemi-Automatic Cleaning General AT the END of the DAY or ShiftAvoid scratching the oven chamber or engaging frame Semi-Automatic Cleaning of the Oven Chamber Semi-automatic cleaning of oven chamberPage Mini Setup To use the Setup MenuSignal Tone VolumeDate Default and Memory SettingsOrder of Cookbook Recipes Network Address Temperature DisplayLanguage Troubleshooting Error Diagnosis SystemError Messages and Remedies Operating Irregularities not having Error MessagesOperating Irregularities not having Error Messages Emergency Operation If the Mini experiences an errorInstructions for Emergency Operation Emergency Operation Methods Operation possible Operation not possible

OES-6.08 specifications

The Cleveland Range OES-6.08 is a versatile and efficient electric steamer designed for commercial kitchens and foodservice operations. Renowned for its ability to produce high-quality steamed dishes, this unit stands out with its combination of advanced technology and user-friendly features, making it a staple for chefs and kitchen staff alike.

One of the main features of the OES-6.08 is its robust construction, designed to withstand the rigors of a busy kitchen environment. The steamer is built with high-quality stainless steel, ensuring durability and resistance to corrosion, while also providing an aesthetically pleasing appearance that fits seamlessly into any kitchen design.

The OES-6.08 boasts a generous capacity, with multiple compartments that can accommodate a wide variety of food items simultaneously. This efficiency allows for large batch cooking, reducing cooking time and enhancing productivity in a fast-paced setting. The unit is equipped with six steaming pans, each capable of holding substantial quantities, making it ideal for serving large groups or events.

In terms of technology, the Cleveland Range OES-6.08 incorporates advanced steam generation systems that ensure even cooking and excellent food quality. It features a precise temperature control system that allows chefs to set the desired steam levels for different types of foods, ensuring optimal results for everything from vegetables to seafood and rice dishes.

Another key characteristic of the OES-6.08 is its user-friendly digital control panel. This intuitive interface simplifies operation, allowing staff to easily adjust settings, monitor cooking times, and receive alerts when cycles are complete. The panel provides operators with the information needed to manage their cooking processes effectively, reducing the chances of overcooking or undercooking.

Moreover, the OES-6.08 is designed with energy efficiency in mind, helping commercial kitchens reduce their overall energy costs. The system uses electric steam generation, which not only reduces water usage but also minimizes the energy required to produce steam, making it an environmentally friendly choice for foodservice operations.

In conclusion, the Cleveland Range OES-6.08 is a powerful electric steamer that combines reliable construction, a user-friendly interface, and advanced steaming technology. Its features cater specifically to the demands of commercial kitchens, allowing chefs to prepare a diverse array of dishes with consistency and ease, ultimately enhancing overall kitchen efficiency and food quality.
Top Page Image Contents