Alto-Shaam 500-S, Holding Cabinet, 300-S Preheat AT 200F 93C for 30 minutes before loading food

Page 18

ope r a tio n

OPE R A TIN G INSTRUCTIONS

1.PREHEAT AT 200°F (93°C) for 30 minutes before loading food.

Push power switch to “On” position. The unit will begin operating at the previous set temperature.

2.Press the Up or Down Arrow Keys to 200°F (93°C).

Pressing and releasing the Arrow Keys will increase the set point by 1 degree. Pressing and holding the Arrow Key will increase set point by 10 degrees.

When Arrow Key is released, a new set point temperature is set. The Set temperature will appear in the Digital Display and the Heat Indicator Light will illuminate. Press the Temperature Display Key for three seconds at any time to display the Actual inside air temperature.

To toggle between Set and Actual:

Factory default is to display Set temperature in the Digital Display. To display Actual temperature:

Press and hold the Temperature Display Key and the Up Arrow Key for 5 seconds. The control will show ACT , then show the Actual temperature.

Repeat to toggle to Set point SET .

Press the Temperature Display Key at any time to display the alternate temperature.

3.When the inside air temperature reaches the desired holding temperature, the Heat Indicator Light will turn off.

4.Load the cabinet with hot food only.

The purpose of the holding cabinet is to maintain hot food at proper serving temperatures. Only hot food should be placed into the cabinet. Before loading the unit with food, use a food thermometer to make certain all food products are at an internal temperature range of 140° to 160°F (60° to 71°C).

All food not within the proper temperature range should be heated before loading into the holding cabinet.

5.Check to make certain the cabinet door is securely closed, and using the Up and Down Arrow Keys, set the temperature to 160°F (71°C).

THIS WILL NOT NECESSARILY

BE THE FINAL SETTING.

The proper temperature range for the food being held will depend on the type and quantity of product. Whether or not the door vents should be open or closed will also depend on the type of food being held. When holding food for prolonged periods, it is advisable to periodically check

the internal temperature of each item to assure maintenance of the proper temperature range. Reset the holding temperature accordingly.

To Toggle between fahrenheit and Celsius

Press the Temperature Display Key at any time to display the alternate temperature.

The factory default is Fahrenheit. To change to Celsius:

1.Press and hold the Temperature Display Key and the Down Arrow Key for 5 seconds.

2. The control will show .C for 3 seconds to verify selection and then show the temperature. (Set Point or Actual, whichever the user has selected) in ºC.

3.Repeat to toggle to Fahrenheit.

Note: With a power failure, factory test, etc., the control will retain the ºC or ºF setting selected by the user when power is restored.

Heat

Digital

Heat

Digital

Indicator Light

Display

Indicator Light

Display

 

Lower Compartment

 

Upper Compartment

 

Control

 

Control

I

 

I

 

o

 

o

 

On/Off Power

Up/Down

On/Off Power

Up/Down

Arrow Keys

Arrow Keys

Switch

Switch

 

 

Temperature

Temperature

Display Key

Display Key

holding cabinets installation/operation/service manual - pg. 16

Image 18
Contents Installation Sanitation L I V e r y P a C K I n gSaFety ProCeDUreS anD PreCaUtIonS N g e rMetal PARTs of THIs Equipment NFPA96 2004 Edition, Par .1.1.2. U.LMinimum clearance Requirements 300-S 500-S750-S 1000-S1000-UP 1200-S1200-UP Pan slides 2 per set 1-3/4 44mm centersSide Racks and Shelves Side Racks and Shelves optional Two 2 slides needed per panOptions and Accessories DescriptionStacking Configurations Model Can be stacked with StaCKIng InStrUCtIonSRISK oF eleCtrIC SHoCK Appliance must be secured To building structureMaximum height of casters is 6 152mm Drip tray installation instructions 500, 750, 1000 Hard wired models ECT RI CA L300-S SE R Information To toggle between Set and Actual Preheat AT 200F 93C for 30 minutes before loading foodPress the Up or Down Arrow Keys to 200F 93C Load the cabinet with hot food onlyDeluxe Control With multiple timers Preheat at 200F 93C for 30 minutes SureTemp Heat RecoveryReset the control to 160F 71C Load with hot food onlyTimer Programming Information Decrease in temperature, excessive condensation will Halo Heat maintains the maximum amount of productWater vapor, or steam. Maintaining maximum ProteCtIng StaInleSS Steel SUrFaCeS CleanIng agentSCleanIng MaterIalS Cause oxidation and pitting that result in rustWarranty BECOMEs Void if Appliance Is Flooded SeVere DaMage or eleCtrICal HaZarD CoUlD reSUltSa nit a tio n Se rv i ce To test probe and air sensor Code Description Possible CauseSingle Compartment 300-S Shown Single Compartment 500-S, 750-S, 1000-S, 1200-S Side PanelUP Shown Model 1000-UP 1200-UP Rv i ce Deluxe Control Electronic Components Cable Heating Service KitS Cable heating kit #4874 #4881 #4978Page Page Page     Page Page Page        Transportation Damage and Claims Voltage Purchased From
Related manuals
Manual 43 pages 62.68 Kb Manual 2 pages 2.17 Kb Manual 48 pages 14.35 Kb

1200-S, 1000-S, 1000-UP, 750-S, 1200-UP specifications

Alto-Shaam has long been a frontrunner in the realm of commercial cooking equipment, and their latest offerings, the Alto-Shaam 1200-UP and 1200-S, exemplify their commitment to innovation, quality, and efficiency. Designed for operators across diverse foodservice settings, these units combine precision cooking with versatility to meet the demands of modern kitchens.

The Alto-Shaam 1200-UP features a unique, patented Halo Heat technology. This innovation utilizes a gentle, consistent heat that surrounds food, ensuring even cooking without excessive drying. This technology excels in maintaining food quality and allows for holding foods at optimal serving temperatures without compromising on taste or texture. This makes it ideal for busy restaurants, catering events, and even institutional settings.

On the other hand, the Alto-Shaam 1200-S offers similar cooking capabilities but is tailored for different operational needs. It features a robust design to handle high-volume demands while maintaining reliability and efficiency. Both models are designed with user-friendly controls, enabling chefs to set precise temperatures and times for various cooking applications.

The Alto-Shaam 1200-UP and 1200-S come equipped with digital smart controls that facilitate intuitive operation. Programmable settings allow for easy customization, enabling operators to save time and maximize productivity during peak service periods. The precise temperature control provided by these systems minimizes food waste and ensures consistency, which is crucial in a high-paced culinary environment.

Another significant characteristic of these models is their energy efficiency. Both the 1200-UP and 1200-S utilize advanced insulation technology to retain heat, reducing energy consumption and operational costs. This sustainable design not only benefits the bottom line but also reflects a growing trend towards environmentally responsible cooking practices in the foodservice industry.

Both units offer ample cooking capacity, making them perfect for various food items, whether it be meats, vegetables, or baked goods. Their durable construction ensures longevity, and their sleek design fits seamlessly into any kitchen layout. Additionally, they are equipped with easy-to-clean surfaces, simplifying maintenance and promoting a hygienic work environment.

In summary, the Alto-Shaam 1200-UP and 1200-S stand out with their cutting-edge Halo Heat technology, user-friendly controls, energy efficiency, and versatile cooking options. With these advancements, Alto-Shaam continues to empower foodservice operators to elevate their culinary offerings while optimizing their day-to-day operations.