INSTA | LLAT | I ON | ||
ELECTR | IC AL | CO NNE CT ION | ||
The app lianc e must be ins talled by a qualifi ed | ||||
serv ice tech nician. | The ove n must be properly | |||
grounded in accordan ce with the Nati onal | ||||
Elec trical Code | and applica ble local cod es. | |||
Plug the unit into a properly | grounded recep tacle | |||
ONLY, positioning | the unit so that the plu g is | |||
easi ly accessible | in case of an emergency. Arcing | |||
will occ ur when connectin g or disconne cting the | ||||
unit unless all contr ols are in the “OFF ” position. | ||||
Proper rece ptac le or out let config uratio n or | ||||
perman ent wiring | for this unit must be installed | |||
by a license d elect rician | in accordance with | |||
applicable loca l elec trica l code s.
230V:To prevent an electri cal shock hazar d bet ween the appliance and oth er appliances or metal parts in close vicinity, an equalizat
The ter minal is marked with the follow ing sym bol .
The appliance must be conn ect ed to an NOTE: elect rical circuit that is protec ted by an
ext ern al GFCI outlet.
ELECTR IC AL - | III |
|
|
| ||
VOLTAGE | PHASE | CYCLE / HZ | AMPS | kW |
| CORD & PLUG |
208- 240 (UL ) | 1 | 60 | 16.0 | 3.85 |
| NO CORD |
at 208 | 1 | 60 | 15.5 | 3.21 |
| & PLUG |
at 240 | 1 | 60 | 17.8 | 4.27 |
| |
230 | 1 | 50 | 16. 0 | 3.68 |
| CEE 7/7 |
| ||||||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
DA NGE R
ELECTRICAL CONNECTIONS MUST
BE MADE BY A QUALIFIED SERVICE
TECHNICIAN IN ACCORDANCE WITH
APPLICABLE ELECTRICAL CODES.
| ELECTR IC AL - 1767 - SK/I II | kW | ||||
|
| VOLTAGE | PHASE | CYCLE / HZ | AMPS | |
| 208- 240 (UL ) | 1 | 60 | 32.0 | 7.70 | |
|
| at 208 | 1 | 60 | 30.9 | 6.43 |
|
| at 240 | 1 | 60 | 35.6 | 8.55 |
|
| 230 | 1 | 50 | 34. 1 | 7.86 |
| ELECTRI CAL - |
| kW | |||
3PH 1PH | VOLTAGE | PHASE | CYCLE/ HZ | AMPS | ||
208 | 1 | 60 | 43.1 | 8.96 | ||
208 | 3 | 60 | 27 | 8.96 | ||
|
| 230 | 1 | 50 | 37.1 | 8.54 |
CORD & PLUG
NO CORD & PLUG NO CORD & PLUG
CORD & PLUG
CORD, NO PLUG
NO CORD & PLUG
NO CORD & PLUG
DA NGE R
ENSURE POWER SOURCE
MATCHES VOLTAGE STAMPED
ON APPLIANCE NAMEPLATE.
DAN GE R
To avoid electrical shock, this appliance MUST be adequately grounded in accordance with local electrical codes or, in the absence of local codes, with the current edition of the National Electrical Code ANSI/NFPA No. 70. In Canada, all electrical connections are to be made in according with CSA C22.1, Canadian Electrical Code Part 1 or local codes.
PG. 10 | 767- SK/III, |