Amana W10249209A Accessories, Temperature and Moisture, Iceand Water, Temperature is too warm

Page 10

Temperature and Moisture

Temperature is too warm

New installation? Allow 24 hours following installation for the refrigerator to cool completely.

Door opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep door fully closed.

Large load of food added? Allow several hours for refrigerator to return to normal temperature.

Control(s) set correctly for the surrounding conditions? Adjust the control(s) a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

Humid room? Contributes to moisture buildup.

Door opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep door fully closed.

Iceand Water

The ice maker is not producing ice or not enough ice

Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

Water shutoff valve not fully open? Turn the water shutoff valve fully open.

Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

Odor transfer from food? Use airtight, moisture proof packaging to store food.

Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

ACCESSORIES

To order stainless steel cleaner, call 1-877-232-6771and ask for the part number listed below or contact your authorized MAYTAG® appliance dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #20000008

10

Image 10
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsRemove the Packaging Clean Before Using Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements LocationRequirementsRecommended Grounding Method Reverse Osmosis Water Supply Water Supply RequirementsConnect the Water Supply Tools NeededCabinet Refrigerator DoorsDoors Door Swing Reversal optional CONDITION/REASON Adjustment Adjust the DoorsUsing theControls Refrigerator USERefrigerator Care CleaningTo Clean Your Refrigerator Crisper Humidity ControlChanging the Light Bulbs TroubleshootingRefrigerator Operation Temperature is too warm AccessoriesTemperature and Moisture Stainless Steel Cleaner and PolishItems Excluded from Warranty Amana Major Appliance WarrantyLimited Warranty This limited warranty does not coverRefrigerador Seguridad DEL RefrigeradorRequisitos de ubicación Instrucciones DE InstalaciónDesempaque el refrigerador Antes de tirar su viejo refrigerador o congeladorMétodo de conexión a tierra recomendado Requisitos eléctricosRequisitos del suministro de agua Suministro de agua de ósmosis inversaConexión al refrigerador Conexión del suministro de aguaConexión a la línea de agua Cómo terminar la instalaciónCarcasa Puertas del refrigeradorPuertas Cómo quitar y volver a poner la puerta en su lugar Uso de los controles Ajustelas puertasCONDICIÓN/MOTIVO Ajuste Limpieza Fábrica de hieloPara limpiar su refrigerador Cómo cambiar los focos Solución DE ProblemasFuncionamiento delrefrigerador Hielo y agua AccesoriosTemperatura y humedad Hay acumulación de humedad en el interiorEsta garantía limitada no cubre Garantía LimitadaExclusiones DE LA Garantía Exclusión DE Garantías ImplícitasInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurDéballagedu réfrigérateur Instructions DinstallationExigences demplacement Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Raccordement de la canalisation deauAchever l’installation Raccordement au réfrigérateurCaisse Portes du réfrigérateurPortes Inversion du sens douverture de la porte facultatif Utilisation DU Réfrigérateur Utilisation des commandesAjustement desportes Nettoyage Entretien DU RéfrigérateurMachine à glaçons Nettoyage de votre réfrigérateurDépannage Remplacement des ampoules d’éclairageFonctionnement du réfrigérateur La porte est difficile à ouvrir Température et humiditéGlaçons et eau Il y a une accumulation dhumidité à lintérieurGarantie Limitée AccessoiresNettoyant et poli pour acier inoxydable Éléments Exclus DE LA GarantieW10249209A EN/FR PN W10249208A

W10249208A, W10249209A specifications

The Amana W10249209A and W10249208A are essential components for users seeking to maintain or enhance the performance of their refrigeration systems. These models are primarily recognized for their compatibility with various Amana refrigerators, playing a crucial role in ensuring optimal cooling efficiency.

The W10249209A is the water filter model, designed to reduce a wide range of contaminants present in tap water, including chlorine, lead, and other harmful substances. By using an advanced filtration system, this model provides clean, great-tasting water for drinking and cooking. Its ability to offer clean water not only addresses health concerns but also improves the flavor of beverages and meals prepared using filtered water.

On the other hand, the W10249208A serves as a replacement for the internal ice maker. This component is vital for producing ice efficiently, allowing users to have a constant supply of ice for their beverages. The ice maker is designed with user convenience in mind, featuring easy installation and compatibility with various refrigerator models, which reduces the hassle often associated with replacing appliance parts.

Both models incorporate high-quality materials, ensuring durability and longevity. The filters can effectively last up to six months, depending on water quality and usage, making them a cost-effective solution for maintaining ice and water quality. Their design prioritizes user safety and environmental consciousness, reducing plastic waste and the need for bottled water.

Another significant characteristic of these components is their adherence to stringent safety and performance standards, including certification by NSF International. This certification validates their effectiveness in reducing specific contaminants, giving users peace of mind regarding the safety of their drinking water.

In terms of technology, both components feature innovative designs that facilitate easy installation and replacement. The user-friendly aspect is a considerable advantage, allowing homeowners to easily undertake maintenance without needing professional assistance.

In summary, the Amana W10249209A and W10249208A are indispensable parts of any Amana refrigerator, prioritizing water purity and efficient ice production. Their advanced technology, durable design, and easy maintainability make them ideal for users who value quality, convenience, and safety in their kitchen appliances. By integrating these models into their systems, users can significantly enhance the functionality and longevity of their refrigerators.