5.Using
6.Tighten the conduit connector screws to secure the power supply cord.
Adjust Leveler Legs
1.Measure the cabinet opening height.
7.Insert tabs on the
8.Using a ¹⁄₄" nut driver and previously removed screw, reinstall the terminal box cover with the wires inside terminal box.
9.Check that no wires are pinched by the cover.
NOTE: Do not plug power supply cord into outlet until instructed.
23⁷⁄₈" - 24 | ³⁄₈" |
| |
(60.6 | cm - |
| |
| 62 | cm) | |
|
| ||
|
|
| |
| cm) | 33¹⁄₂ | "*- |
|
| |
(61 | (85. | 1 | 35" |
| ||
|
|
| ||||
|
|
|
| cm |
| |
|
|
|
|
| - |
|
|
|
|
|
| 88.9 | cm) |
|
|
|
|
|
| |
2.Adjust the dishwasher leg height according to the following chart. Turn both of the leveler legs to the same height.
Height | Adjusted Leg Height | Adjusted Leg | |
(H) | Height (X) | (H) | Height (X) |
33¹⁄₂" (85.1 cm) | 0" | 34³⁄₈" (87.4 cm) | ⁷⁄₈" (2.2 cm) |
|
|
|
|
33⁵⁄₈" (85.4 cm) | ¹⁄₈" (0.3 cm) | 34¹⁄₂" (87.7 cm) | 1" (2.5 cm) |
|
|
|
|
33³⁄₄" (85.7 cm) | ¹⁄₄" (0.6 cm) | 34⁵⁄₈" (88 cm) | 1¹⁄₈" (2.8 cm) |
|
|
|
|
33⁷⁄₈" (86 cm) | ³⁄₈" (1 cm) | 34³⁄₄" (88.3 cm) | 1¹⁄₄" (3.1 cm) |
|
|
|
|
34" (86.4 cm) | ¹⁄₂" (1.3 cm) | 34⁷⁄₈" (88.6 cm) | 1³⁄₈" (3.5 cm) |
|
|
|
|
34¹⁄₈" (86.7 cm) | ⁵⁄₈" (1.6 cm) | 35" (88.9 cm) | 1¹⁄₂" (3.8 cm) |
|
|
|
|
34¹⁄₄" (87 cm) | ³⁄₄" (1.9 cm) |
|
|
|
|
|
|
X |
1" |
2" |
11