Carrier 30GN040-420 Keypad Directory Service, Subfunction Keypad Entry Display Comment Factory

Table 9 Ð Keypad Directory (cont)

SERVICE (cont)

SUBFUNCTION	KEYPAD ENTRY		DISPLAY	COMMENT
3 FACTORY			XXXXXXXX	Con®guration Code 5
CONFIGURATION (cont)
			XXXXXXXX	Con®guration Code 6
			XXXXXXXX	Con®guration Code 7
4 FIELD			FLD CFG	Adjustable Field Con®guration
CONFIGURATION
			ENO X	CCN Element Address
			BUS X	CCN Bus Number
			BAUD X	CCN Baud Rate
			FLUID X	Cooler Fluid Select (water/medium brine)
			UNITS X	Display Unit Select (English/Metric)
			DELAY X	Delay at Power Up (minutes)
			NULA X	No. Circuit A Unloaders
			NULB X	No. Circuit B Unloaders
			HGB X	Hot Gas Bypass Select (used, not used)
			SEQT X	Loading Sequence Select (equal circuit, staged circuit)
			LEADT X	Lead/Lag Sequence Type
			OPS X	Oil Pressure Switch Select (enable/disable)
			HEADT X	Head Pressure Control Type
				(none, air cooled, water cooled)
			MM X	Motormaster Select
			CSPTYP X	Cooling Set Point Control Select
			CRTYP X	Cooling Reset Control Select
			ERTYP X	External Reset Sensor Select
			OATSEL X	Outdoor-Air Sensor Select
			LSTYP X	Demand Limit Control Select
			RAMP X	Ramp Load Select (enable, disable)
			LOCK X	Cooler Pump Interlock Select
			CPC X	Cooler Pump Control Select
			REMA X	Remote Alarm Option Select (yes/no)
			ALRST X	Allow Local/Stop/CCN Reset of Alarms (yes/no)
To toggle between inputs (Yes/No) Press:		(no) or	(yes)
5 SERVICE			SRV CFG	Service Con®gurations
CONFIGURATION
			XXXXXXXX	Con®guration Code 8
			XXXXXXXX	Con®guration Code 9
			REFRIG X	Refrigerant
			TDTYP X	Pressure Transducer Select
			OPS X	Oil Transducer Set Point (psig)
			LPS X	Low Pressure Set Point (psig)
			FANTYP X	Fan Staging Select
			SH X	EXV Superheat Set Point (F)
			MOP X	EXV MOP Set Point (F)
			ZM X	Z Multiplier

LEGEND

CCN Ð Carrier Comfort Network

EXV Ð Electronic Expansion Valve

MOP Ð Maximum Operating Pressure

*Will read ALARM or ALERT as appropriate.

²Must be con®gured.

**If applicable.

²²Not manually resettable.

NOTE: If metric option is selected under , temperature expressed as Celsius and pressure will be expressed as kPa.

33