78045 LG Dshwshr OM ENSPv08.qxd 4/2/08 10:28 PM Page 18
C A R E & C L E A N I N G
For best results, it is important to periodically check and care for the spray arms.
WARNING To prevent injury during care and maintenance/cleaning, wear gloves and/or protective clothing.
CLEANING METALLIC PARTS
Some exterior and interior parts can be cleaned with a damp cloth or sponge. A cloudy film may form on the surface of the stainless steel tub, especially with hard water.
CLEANING THE LOWER SPRAY ARM
•Make sure that the water jet holes are not blocked by food particles.
•When cleaning is necessary, remove the lower spray arm by pulling up.
•After cleaning the lower spray arm, replace it by pushing down until it clips into place. Be sure the spray arm turns freely.
CLEANING THE UPPER SPRAY ARM
1Pull the upper rack forward. Make sure that the water jet holes are not blocked by food particles.
When cleaning is necessary, remove the upper spray arm by turning the nut on the bottom of the spray arm 1/8th turn counterclockwise and pulling down (see illustrations).
2After cleaning the upper spray arm, press it up into place. Turn the nut 1/8 turn clockwise to make sure the nut locks back into place.
18