LG Electronics LMV1630BB, LMV1630WW installation instructions Attach The Oven To The Wall

Page 17

STEP 6: Attach The Oven To The Wall

W A R N I N G

To avoid risk of personal injury or property damage, you will need two people to install this microwave oven.

1.Carefully lift microwave oven and hang it on support tabs (See Figure 27) at the bottom of the mounting plate.Reaching through upper cabinet, thread

power supply cord through the power supply cord hole in the bottom of the upper cabinet.

See Figure 31.

2.Rotate the microwave oven upward so the top of

oven is against the bottom of the upper cabinet or cabinet frame.

3.Then insert a bolt down through each hole in the upper cabinet bottom.See Figure 32.

Tighten the bolts until the gap between the upper cabinet and microwave oven is closed.

4.If wall-vented or room-vented installation is used,go to No. 7 on the next page.

Power Cord

Power Cord

Hole

Figure 31

Figure 32

– 17

Image 17
Contents Microwave Oven For Your Safety Your Safety FirstThis Appliance Must be Grounded Make Sure YOU have Enough Space and Support Two tapping screws Actual Size Damper/duct connectorFour 1/4 x 2 lag screws Actual Size Stud Finder or Thin Nail Upper Cabinet Grounded Outlet Power-Supply-Cord HolePrepare The Electrical Connection Wall Venting Prepare The Venting SystemRoof Venting Room Venting73 ft Standard Fittings Duct LengthExceed 140 feet Electrical Shock HAZARD! Unplug Unit Before Working on IT Prepare The Venting BlowerWALL-VENTED Installation ROOF-VENTED Installation Prepare The Wall & Upper Cabinet Rear Wall Template Drill The Holes In The Wall And Upper CabinetOven Must Be Connected To At Least One Wall Stud Install The Mounting PlateFor Wall-Vented Attach The Oven To The Wall Cord