LG Electronics LMV1630WW, LMV1630BB Make Sure YOU have Enough Space and Support

Page 4

Your Safety First

MAKE SURE YOU HAVE ENOUGH SPACE AND SUPPORT.

Mount the oven against a flat, vertical wall, so it is supported by the wall. The wall should be constructed of minimum 2" x 4" wood studding and 3/8" thick drywall or plaster/lath.

ATTACH (See note on page 5) the two lag screws supporting the oven to a vertical, 2" x 4" wall stud.

DO NOT mount the microwave oven to an island or peninsula cabinet.

BE SURE the upper cabinet and rear wall structures can support 150 lbs., plus the weight of any items you place inside the oven or upper cabinet.

Locate the oven away from strong draft areas, such as windows, doors, and strong heating vents.

BE SURE you have enough space. See Figure 4 below for minimum vertical and horizontal clearance.

W A R N I N G

If you do not mount the oven as instructed,

you risk personal injury and/or property damage.

Grounded Outlet (inside upper cabinet)

Power Supply Cord Hole

30" min. cabinet opening width

30" min. clearance from bottom of cabinet to cooking surface or countertop before installation.

(Use templates included with installation instructions)

Figure 4

CAUTION

Before you begin installing the oven, PLACE A PIECE OF THE CARTON OR OTHER HEAVY MATERIAL (a blanket) over the countertop or cooktop to protect it. Do not use a plastic cover. Failure to protect these surfaces could result in property damage.

4

Image 4
Contents Microwave Oven Your Safety First For Your SafetyThis Appliance Must be Grounded Make Sure YOU have Enough Space and Support Four 1/4 x 2 lag screws Actual Size Damper/duct connectorTwo tapping screws Actual Size Stud Finder or Thin Nail Prepare The Electrical Connection Power-Supply-Cord HoleUpper Cabinet Grounded Outlet Prepare The Venting System Wall VentingRoof Venting Room VentingExceed 140 feet Standard Fittings Duct Length73 ft Prepare The Venting Blower Electrical Shock HAZARD! Unplug Unit Before Working on ITWALL-VENTED Installation ROOF-VENTED Installation Prepare The Wall & Upper Cabinet Drill The Holes In The Wall And Upper Cabinet Rear Wall TemplateInstall The Mounting Plate Oven Must Be Connected To At Least One Wall StudFor Wall-Vented Attach The Oven To The Wall Cord