Parts, Tools, Materials
You will need the following tools and materials for the installation:
Carton or other heavy material such as a blanket for covering the counter top.
Clear Tape
(for taping the templates to the wall)
Saber Saw
(for cutting vent holes for roof or wall vending)
Phillips Screwdriver
(for the screws)
Pencil
Stud Finder or Thin Nail
Keyhole Saw (for the power cord hole)
Electric Drill
3/8" and 3/4" wood drill bits
1/2" and 3/16" drill bits
Flat Blade Screwdriver
(for the toggle bolts)
Plumb Line
Measuring Tape (metal preferred)
Duct Tape
Small Side Cutters or Tin Snips
Caulking Gun and Caulk
●If you have brick or masonry walls, you will need special hardware and tools.
●The ductwork you need for the installation is not included. All wall and roof caps must have a
–6 –