Chapter 2: Connecting the

Hardware

Installing Your External Tape Drive

NOTE: Before you begin this installation, make sure your computer meets the requirements listed in “Minimum System Requirements” on page 35.

HP Colorado

External Tape Drive

Printer (if attached)

Computer

Tape Drive’s

Power Supply

and Power Cord

Tape Drive’s Data Cable

The illustration above shows a hardware setup that will be similar to yours after you complete the step-by-step installation instructions in this section.

WARNING: DO NOT, under any circumstances, open the external tape drive’s case. If you suspect problems with your drive, service must be performed by a certified HP technician. See the telephone numbers at the back of this manual.

4