HP 5GB, 8GB manual Colorado Backup for Windows 95 Requirements, Windows NT, LAN Installation

Technical Information 37

Colorado Backup for Windows 95 Requirements

Installing Colorado Backup for Windows 95 requires:

nWindows 95

n8 MB of RAM

n20 MB of available hard drive space (15 MB for the software and an additional 5 MB of space for operations overhead). To check available hard drive space, double-click on My computer; click on the icon representing the hard drive on which the backup software will be installed; open the File menu and select Properties. Available hard drive space must be at least 20 MB.

Windows NT 4.0

You can use the Windows NT Backup applet with this tape drive.

LAN Installation

When using Colorado Backup on a LAN, the tape drive hardware and software must be installed in a workstation. Do not install them on the network server. For other LAN installation options, call the Cheyenne Customer Support phone number listed on page 46.

NOTE: Do not use Colorado Backup for Windows 95 to backup Novell servers.

Colorado Backup for DOS can backup Novell 2.x and 3.x servers or Colorado

Backup for Windows (3.1 or 3.11) can backup Novell 3.x servers.

NOTE: Colorado Backup for Windows 95 can back up computers over your Windows 95 and Windows for Workgroups networks. However, Colorado Backup for Windows 95 will only back up the Windows 95 registry of the computer to which your tape drive is attached. The Windows 95 registry of a remote computer will not be backed up.