LG Electronics LCE30845 Avoiding Scratches, USE FLAT-BOTTOMED Cookware, For Best Results

Page 18

INDUCTION

Place a pot filled with a little water (1/8 1/4 ) on the Cooking Zone. Set the Cooking Zone to full power (power level 9).

CAUTION: The pan base of suitable kitchenware heats up within a

few seconds! Water should boil rapidly.

• You can also check cookware suitability with a magnet. If the magnet remains fixed to the base of the pan, the pan is suitable for induction cooking.

SELECTING COOKWARE (continued)

AVOIDING SCRATCHES

It is recommended to always use heavier gauge stainless steel cookware on your induction cooktop surface. This will help reduce the possibility of developing scratches on the ceramic surface. Low-quality cookware can scratch the cooktop surface.

Cookware should always be lifted over the ceramic cooktop surface to prevent scratching. Sliding any type of cookware over the ceramic cooktop can affect the overall appearance of the cooktop. Over time, sliding ANY type of cookware over the ceramic cooktop may alter the overall appearance of the cooktop. Eventually, the buildup of scratches can make cleaning the surface difficult and degrade the overall appearance of the cooktop.

Scratches can also result from grains of sand (e.g., after washing vegetables) which are dragged with the pot across the cooking surface.

USE FLAT-BOTTOMED COOKWARE

Cookware must fully contact the surface of the cooking element. Use flat- bottomed pans sized to fit the cooking element and amount of food being prepared. Check for flatness by rotating a ruler across the bottom of the cookware.

FOR BEST RESULTS:

Always follow the recommendations for proper cookware type and size. In addition:

Do not use dirty pans with grease buildup. Always use pans that are easy to clean after cooking, and make sure that the bottoms of the pans are clean and dry.

When cooking with large amounts of liquid, use large pots so that nothing can boil over.

Do not let pans boil dry. This may cause permanent damage in the form of breakage, fusion, or marring that can affect the ceramic cooktop. (This type of damage is not covered by your warranty.)

Match the pan size and Cooking Zone to the amount of food being prepared.

TIPS FOR SAVING ENERGY:

• Always position pots and pans before you switch on the Cooking Zone.

• Dirty cooking zones and cookware use more electricity.

• Whenever possible, always have the lid firmly placed on the pots and pans so that they are completely covered.

Copyright © 2007 LG Electronics. Inc. All right reserved.

- 18 -

LGE Internal Use Only

Only for training and service purposes

 

 

Image 18
Contents Website http//biz.lgservice.com Ceramic Glass Induction CooktopSafety Precautions Forward Safety PrecautionsImportant Notice Radio Interference Important Safety Notice Safety Precautions Electrical SafetySwitch off the Cooking Zones after use Child SafetySafety During USE Do not use the cooktop to heat the roomSafety During USE Safety When CleaningCook Meat and Poultry Thoroughly HOW to Avoid Damage to the ApplianceRead and Follow this Safety Information Carefully Disposal of OLD AppliancesContents Specifications DescriptionUnpacking the Cooktop Installation InstructionsBefore YOU Begin Read these instructions completely and carefullyPreparing the Installation Location Important Installation InformationDimensions and Clearances ModelProviding the Electrical Connection Important Safety InstructionsElectrical Connections Electrical RequirementsElectrical ground is required on this appliance Cooktop Installation Wire Grounded Junction BOXPreferred installation Alternative installation Final CheckModel and Serial Number Location Selecting Cookware InductionInduction Cooking HOW Induction Cooking WorksFor Best Results Avoiding ScratchesUSE FLAT-BOTTOMED Cookware Tips for Saving EnergyCorrect Cookware Selection and PlacementSelecting the Proper PAN Size IncorrectGeneral Cleaning Cleaning and CareCleaning the Cooktop Problem SoilsDescription of Feature Parts and Features of Your CooktopTouch Control Features Before Using the Cooktop Setting the ControlsOperating Instructions Setting the Power Level To adjust the power levelTo turn off the cooking zone Warm Power BoostActivating Power Boost To activatePower Level Guide Setting Function Used forSetting the Timer Using the Bridge Cooking ZonesUsing the Timer Canceling the TimerUsing Child Lock Other FunctionsElectric Circuit Drawing Disassembly DisassemblyCeramic Glass Part Burner assembly Controller assembly IH module assembly Power harness assembly Terminal block and power cord assembly Burner assembly left Burner assembly right Controller assembly key PCB Controller assembly main PCB IH module assembly Induction board IH module assembly Induction board IH module assembly filter board IH module assembly fanCeramic Glass Trouble ShootingNo Power / No BrokenWorking IHInductionHeating is not E1 displayProperly Induction Flashing HHob does not work Improper working of controlExploded View Model LCE30845EALHF1
Related manuals
Manual 32 pages 24.61 Kb