LG Electronics LCE30845 Using the Bridge Cooking Zones, Using the Timer, Setting the Timer

OPERATING INSTRUCTIONS

USING THE BRIDGE COOKING ZONES

BRIDGE COOKING ZONES

The two left Cooking Zones can be used together as a single Cooking Zone using the Bridge function. This allows you to cook with larger, oblong pans. NOTE: When using the supplied bridge pan, it is important to rub it with oil to prevent burning and sticking.

ACTIVATING THE BRIDGE COOKING ZONE

Touch the BRIDGE pad. The indicator above the pad will light.

Touch theorpad for either left Cooking Zone to adjust the power level for both Cooking Zones.

NOTE:

• Use the supplied bridge pan ONLY on the bridge cooking zone.

• To purchase a replacement or additional bridge pans, call 1-800-243-0000and choose the appropriate prompt from the menu. Or, visit our Web site at http://us.lgservice.com.

USING THE TIMER

The timer feature may be helpful if a recipe calls for cooking for a set time. The timer can be set from 1 to 99 minutes. Once set, the digital display between the timerorpads will begin to count down the remaining time in minutes.

NOTE: The timer function is a minute timer only. It does NOT turn the cooktop ON or OFF.

SETTING THE TIMER

Touch theorpads under the word TIMER. Each touch will increase or decrease the

time by one minute, from 1 to 99 minutes. You may also touch and holdorto scroll up or down. The timer display will flash.

Once the desired time is set, the display will stop flashing and the timer will start counting down after no pad has been touched for 5 seconds. Once the timer reaches , a long beep will sound to indicate the time is up.

CANCELING THE TIMER

To cancel the timer, touch the TIMERandpads at the same time, OR Touch and hold theorpad until appears in the display.

The timer display will turn off.

LGE Internal Use Only	- 27 -	Copyright © 2007 LG Electronics. Inc. All right reserved.
		Only for training and service purposes