OPERATING INSTRUCTIONS
BEFORE USING THE COOKTOP
Before using the cooktop for the first time, clean it thoroughly with the included cleaner or ceramic cooktop cleaner according to the Care and Cleaning instructions in this guide. This will remove any help protect the ceramic surface and make future cleanup easier.
CAUTION: Never use scrub pads or abrasive cleaners. They can cause permanent damage to the cooktop surface.
SETTING THE CONTROLS
To operate the touch control pads, touch the pad firmly with the flat part of your fingertip.
FIRST OPERATION
The first time that power is supplied to the cooktop,
will flash in the display for each cooking zone for 60 seconds or until the POWER pad is touched for approximately 2 seconds.
NOTE: 
will also flash when power is restored after a power outage.
ACTIVATING THE COOKTOP
To turn on the cooktop, touch the POWER pad for approximately 2 seconds. The indicator above the pad will light.
NOTE: After turning on the cooktop with the POWER pad, you must select one of the Cooking Zones within 20 seconds using the Cooking Zone ON/OFF pad(s). If no selection is made, the cooktop will turn off for safety reasons.
SELECTING THE COOKING ZONE
To select the desired Cooking Zone, press the ON/OFF pad. The display for the
selected Cooking Zone will show 
and and an indicator will light to indicate that the Cooking Zone is on but no power level is set.
NOTE: Once the Cooking Zone has been selected with the ON/OFF pad, the power level must be
selected within 5 seconds with the 
or 
pad. Otherwise, the Cooking
Zone will turn off for safety reasons.
LGE Internal Use Only | - 23 - | Copyright © 2007 LG Electronics. Inc. All right reserved. |
|
| Only for training and service purposes |