
How to Operate
Heating
Open the door and place the food in the oven cavity. Close the door.
“0” must be showing in the display window.
A. Manual Single Stage Heating:
This feature gives the user maximum flexibility to set the oven to desired heating time and power level. This is ideal for menus that require various heating requirements.
| Example: To heat for 2 minutes at 1000 W |
|
| ||
1. |
|
|
| • Press the Power Level Pad once. | 1 |
|
|
|
| ||
2. |
|
|
| • Press the Memory Pads 2, 0 and 0. | 1 |
2 | 0 | 0 |
| ||
|
|
| |||
3. |
|
|
| • Press the Start Pad. | 1 |
|
|
|
| Heating will start. The time on digital |
|
|
|
|
| display will count down. |
|
4. | Beep tone will sound. |
| • All heating will stop. When opening the |
| |
| (See page 18) |
|
| door, the display will stop blinking. |
|
B. Manual 2 or 3 Stages Heating:
This feature allows you to set to begin heating at one power level then shift automatically to a different power level after the designated length of heating time.
Example: To heat for 2 minutes at 340 W for 2nd stage heating
For Stage 1 cooking
1.
For Stage 2 cooking
1. |
|
| • Press the Power Level Pad 3 times. | 1 | 2 | |
|
|
| Indicator will change each time the pad is |
|
| |
|
|
| pressed. “ | ” is now displayed. The stage |
|
|
|
|
| “2” is blinking. |
|
| |
2. 2 | 0 | 0 | • Press the Memory Pad 2, 0 and 0. | 1 | 2 | |
|
| |||||
3. |
|
| • Press the Start Pad. | 1 | 2 | |
|
|
| The total time for both stages will be |
|
| |
|
|
| displayed. The stage “1” and the power |
|
| |
|
|
| level “ ” blink. The oven lamp will be |
|
| |
|
|
| turned on. Heating will start. |
|
| |
|
|
| • The total time will be displayed and count down. |
|
| |
|
|
| • When oven shifts to the next stage, a single |
| 2 | |
|
|
|
|
| ||
|
|
| beep tone will sound. The stage “2” and the |
|
| |
|
|
| power level “ | ” blink. |
|
|
4. Beep tone will sound. (See page 18)
NOTE:
For 3 stages heating, select a power level again and set the cooking time.
SPECIAL NOTE: For both single and 2 or 3 stages heating
1.While heating, one touch on the Stop/Reset Pad stops the oven. You can restart by pressing the Start Pad or a second touch on the Stop/Reset Pad will cancel the selected program.
2.One touch on the Stop/Reset Pad, before the heating cycle is started, will cancel the selected program.
NE-1037
- 11 -