LG Electronics NE-1037, NE-1027 Programming the Double Quantity Pad, Press Double Quantity Pad

How to Operate

C. Programming the Double Quantity Pad:

Your oven is preset at the factory to automatically double the programmed time for double quantity heating.

This model allows you to customize the heating time and/or power level for double quantity of your menu items.

For example, if Memory Pad 2 is set for 20 seconds at 1000 W, 40 seconds at 1000 W is set for double quantity heating automatically. However, if your own tests have determined that the correct heating time required for two portions is less (only 30 seconds at 1000 W), you can program as shown below.

Example: To program 30 seconds at 1000 W on double quantity of Memory Pad 2 (display must be blank)

1.			• Press the Program Pad.
			Note:
			• If no “	” Indicator appeared on
			display, “Progam Lock” should be
			cancelled. (See page 16)
2.			• Press Double Quantity Pad.		x2
		X2
3.			• Press the Memory Pad 2.		x2	1
	2
			The pad number and the previously
			selected time and power level for double		x2	1
			quantity heating will briefly appear in the
			display.
			• The pad number and Stage Heating		x2	1
			Indicator will reappear in the display.
4.			• Press the Power Level Selector Pad		x2	1
			once. The Memory Pad number will go
			out.
5.			• Press Memory Pads 3 and 0.		x2	1
	3	0
6.			• Press the Program Pad again. You have		x2	1
			completed programming the selected
			Memory Pad for double quantity heating.
					x2	1
			• 2 seconds later, the display will confirm
			your programming.
			• 2 seconds later, the display will go blank.

NOTE: • Program the remaining Memory Pads as desired by repeating steps 1 - 6 above. You may insert up to 10 memory programs.

•When the Program indicator “ ” is blinking, the program can be cancelled and/or the pad number erased by pressing the Stop/Reset Pad.

NE-1037

- 15 -