
NE-1037
How to Operate
B. Programming Memory Pads for 2 or 3 Stages Heating:
Example: To program for 2 minutes at 340 W for 2nd stage heating using Memory Pad 5
1. Complete steps 1 to 4 on page 13. | • Program the 1st stage for 30 seconds at | 1 |
| ||||
|
| ||||||
|
|
|
| 500 W. |
|
| |
2. |
|
|
| • Press the Power Level Pad 3 times. | 1 | 2 | |
|
|
|
|
| |||
|
|
|
| “ | ” is now displayed. |
|
|
3. |
|
|
| • Press the Memory Pads 2, 0 and 0. | 1 | 2 | |
2 | 0 | 0 |
|
| |||
4. |
|
|
| • Press the Program Pad again. You have | 1 | 2 | |
|
|
|
|
| |||
|
|
|
| completed programming the selected |
|
| |
|
|
|
| Memory Pad for 2 stages heating. |
|
| |
|
|
|
| Double heating time for double quantity | 1 |
| |
|
|
|
| heating was automatically set. |
|
| |
|
|
|
| • 2 seconds later, the display will confirm |
|
| |
|
|
|
| your programming. |
| 2 | |
|
|
|
|
|
|
| |
|
|
|
|
| x2 | 1 | 2 |
|
|
|
|
| x2 | 1 |
|
|
|
|
|
| x2 |
| 2 |
|
|
|
| • After all of your programming has been |
|
| |
|
|
|
| completed, the display will go blank. |
|
|
NOTE: • Program the remaining Memory Pads as desired by repeating the steps above. DO NOT OPEN THE OVEN DOOR during programming.
•For 3 stages heating, select a further power level and set the desired heating time between steps 3 and 4 above.
- 14 -