NE-1037
How to Operate
D. To Select Beep Tone Options:
The Beep Tone can be set, ON or OFF.
1. | Open the door. |
|
|
2. |
| • Press the Program Pad. The display will |
|
|
| not change. |
|
3. | 0 | • Press the Memory Pad 0. | 1 |
| |||
4. | 0 | • Repeat pressing the Memory Pad 0. | 2 |
| Select “OFF” of Beep Tone. |
| |
|
|
| |
|
| Stage Indicator 1 = ON |
|
|
| Stage Indicator 2 = OFF |
|
5. |
| • Press the Program Pad again. You have | 2 |
|
| ||
|
| completed programming the beep tone. |
|
|
| • 2 seconds later, “0” will appear in the |
|
|
| display. |
|
E. To Read the Cycle Counter:
The oven can display the total number of times the oven has been operated cumulatively. This may be used to analyze usage of the oven and traffic flow at the location.
1.Open the door.
2. |
| • While pressing Stop/Reset Pad, press | |
+ | |||
| Power Level Pad. The display shows the | ||
|
| total cumulative number of times the | |
|
| oven has been used. | |
|
| Example: |
•9999 means the oven has been used
999900 - 999999 times.
•0020 means the oven has been used
2000 - 2099 times.
•If the total cumulative number of times is less than 100 times, the display will not be changed.
•2 seconds later, “0” will appear in the
display window.
- 18 -