LG Electronics LFC25770, LFC21770 manual Tilt-Out Door Basket LFC 25770** only, Pull-Out Drawer

REMOVING AND REPLACING COMPONENTS (CONT.)

Tilt-Out Door Basket (LFC 25770** only)

1To remove the tilt-out door basket, press in on the end bracket, then pull up on the end of the basket to remove.

2To replace the tilt-out door basket, insert the bracket into one side and hook one end of the basket into the bracket. Next, hook the other basket end into the other bracket and push the bracket downward into place.

NOTE: Be sure the back of the basket is positioned behind the retention tab on each bracket.

Pull-Out Drawer

Bracket

1To remove the drawer, push the tabs located on the front inside surface of each rail. Next, gently lift the rear left and right sides of the drawer and pull it out.

2To reinstall, pull out both rails to full extension. Insert the end of rib in the bracket at left and right. Making sure that the guides at the front are lined up properly, gently push down on both sides.

27