LG Electronics LRBP1031NI, LRBP1031W manual Operation, Starting, Temperature Control, Quick Freeze

OPERATION

Starting

When your refrigerator is first installed, allow to run 2-3 hours to stabilize at normal operating temperature prior to filling it with fresh or frozen foods.

If operation is interrupted, wait 5 minutes before restarting.

❒FREEZER

■Freezer temperature control is on the top of the Refrigerator-Freezer. Initially set the Freeze Temp at mid-point. By pressing the Freezer Temp button, you can adjust the temperature of the Freezer as indicated by the numbers of lamps lit.(The setting is composed of five steps; 5 lamps lit indicates coldest.)

■When you starting the Refrigerator-Freezer or connecting the power plug to the outlet, temperature setting is automatically set to the mid-point.

Temperature Control

Your refrigerator has two controls that let you regulate the temperature in the refrigerator and freezer compartments.

❒REFRIGERATOR

62

53

4

Temp. Control

■Initially set the TEMP. CONTROL at 4. Then adjust the compartment temperature according to your desire.

■If you want an inside temperature slightly less cold or colder, turn the knob towards MIN or MAX, respectively.

When the surrounding temperature is low, adjust the TEMP. CONTROL MIN.

■When the button is pushed, the buzzer sounds.

Quick Freeze

■This function is used when you want to freeze the foods quickly. Press the QUICK FREEZE button once, and then the quick freeze operation starts with the lamp lit. The quick freeze operation takes about 3 hours.

When its operation ends, it automatically returns to the normal state.

If you want to stop the quick freeze operation, press the QUICK FREEZE button once more, the lamp goes out, and the quick freeze operation stops and the refrigerator returns to the normal state.

QUICK FREEZE

7

ENGLISH FRANÇAIS ESPAÑOL