The enamelled oven burner trim (supplied with some models only) can be removed for cleaning.
The oven burner trim hooks onto the front of the oven burner bracket.
When refitting make sure that the trim is in the middle of the front of the oven burner bracket.
The Main Oven side linings
The oven has removable oven side lining panels that have been coated with special enamel that partly cleans itself. This does not stop all marks on the lining, but helps to reduce the amount of manual cleaning needed.
The self cleaning panels work better above gas Mark 6. If you do most of your cooking below this temperature, occasionally remove the panels and wipe with a lint free cloth and hot soapy water. The panels should then be dried and replaced and the oven heated at Gas Mark 7 for about one hour. This will ensure the self cleaning panels are working effectively.
Don’t use steel wool (Brillo) or any other materials that will scratch the surface. Don’t use oven cleaning pads.
Before cleaning the oven, cover the burner at the rear to stop the holes getting blocked as you clean. If they are accidentally blocked, clean them out with thin wire, such as fuse wire.
Removing the Oven Linings
The lining panels can be removed for cleaning and for cleaning behind. Remove the shelves first.
Each side of the oven is fixed with four fixing screws. You don’t have to remove the screws to remove the oven linings. Lift each side panel upwards and they will slide off the screws. Then pull them forwards.
Once the linings are removed, the oven enamel interior can be cleaned.
The Tall Oven
To clean the oven sides slide out the shelves, unhook the supports from the oven sides and lift out.
16