Rangemaster U1 215 02 You will also need the following tools, Electric drill Masonry drill bit

Page 24

You will need the following equipment to complete the cooker installation satisfactorily

STABILITY BRACKET

If the cooker is to be supplied with gas through a flexible hose, a stability bracket or chain must be fitted.

These are not supplied by with the cooker but are available at most builders merchants.

GAS PRESSURE

TESTER

FLEXIBLE GAS HOSE

Must be in accordance with the relevant standards. For LP Gas it should be suitable for LPG, capable of 50mbar pressure, 70°C temperature rise and carry a red stripe, band or label

MULTIMETER

(for electrical checks)

You will also need the following tools:

1.Electric drill

2.Masonry drill bit

(only required if fitting the cooker on a stone or concrete floor)

3. Rawlplugs

(only required if fitting the cooker on a stone or concrete floor)

4.Steel tape measure

5.Cross head screwdriver

6.Flat head screwdriver

7.4mm & 3mm Allen keys

8.Spirit level

9.Pencil

10.Adjustable spanner

11.Screws for fitting stability bracket

24

Image 24

Contents 90 Gas Users Guide Installation Instructions U1 215 Contents Minute Tour Minute Tour continues overMinute Tour GriddleNatural gas cookers LP gas cookersSlow cooking To set the time of day Hotplate burners Ovens GrillMain gas oven Main Oven shelves HandyrackTall oven shelves Tall electric ovenMain Oven cooking guide Mark From TOPTall Oven cooking guide Roast MeatsCooking using the timer ‘S’ Slow cookingMain ovenClock To time something that’s cooking minute minderCleaning your cooker Hotplate burnersGrill Control Panel and DoorsMain Oven Main Oven side linings Tall OvenMoving your cooker Do not move the oven by pulling the door handles or knobsTroubleshooting Problems with the burner main ovenTroubleshooting General Safety Instructions If YOU Smell GASThis appliance is heavy, take care when moving it Dear Installer Provision of Ventilation Location of CookerYou will also need the following tools Electric drill Masonry drill bitRawlplugs Positioning the Cooker Unpacking the CookerChecking the parts Moving the Cooker LevellingFit the Handles Pressure testing Gas ConnectionFitting a stability bracket Electrical Connection Electrical checksGrill check Hotplate checkMain Oven check Tall ovenFitting the plinth Customer careCircuit Diagram Technical Data DimensionsThis cooker is designed for use on either Connections