BlueAnt Wireless SUPERTOOTH II Redialing Handsfree profile only, Audio Transfer Kit to Phone

Redialing (Handsfree profile only)

Make a long press on the Pick-Up/Hang-Up Button. Audio will be on the Supertooth II.

Audio Transfer

Kit to Phone

Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone.

Phone to Kit

For Nokia Phones:

Flip up the Swivel Arm from 0º to 55º or 210º positions. This will automatically transfer the audio from phone to kit.

For Other Phone Models:

Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then shortly press the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit.

Note: for some phones in Headset mode, Kit to Phone transfer must be done from the phones menu.

Rejecting a call (Handsfree Profile only)

Press Reject Button to reject an incoming call.

Note : For Headset profile, Call Reject must be done from the phone.

Setting the Volume of the Supertooth II

Set the volume using the Volume Control.

1.Turn it clockwise to increase the volume.

2.Turn it counterclockwise to decrease.

Note: If the volume knob on the Supertooth II is too high, it can cause feedback (Whistling sound), echo, or background noise during calls on some cell phones.

Setting the Volume of the Mobile Phone

Volume levels on most phones are set automatically to optimum levels when you connect your Supertooth II.

13