MOTOROLA V3 / V80 / V525 / V535 / V600 / V620 / E398
a.ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.
1.Press Menu key featured as 
or press on the center button of the
NavigationKey featured as 
to access Menu. Scroll to Settings, SELECT. Choose Connection, SELECT. Bluetooth Link, SELECT.
2.Scroll to Setup, Select. Scrool to Power, Select. Choose ON
3.Continue pressing Back, to exit.
b. PAIRING TO THE CELLULAR PHONE (not possible during charging)
1.Bring the cellular phone at about 20 cm from the Handsfree Kit.
2.The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink).
3.Simultaneously press the Reject Button and the
Pairing Mode.
4.Press Menu key 
or press the center button of the 
to access Menu. Scroll to Settings, SELECT. Choose Connection, SELECT. Bluetooth Link, SELECT.
5.Choose Handsfree, SELECT. [Look for devices], SELECT. The phone will then scan the device to be added.
6.On the scan results, choose the Supertooth, SELECT.
A question “Bond with … (device name)?” appears. Press YES.
7.Enter Bluetooth passkey “0000” then press ok. If pairing is successful, a remark “Connected to…” appears. The phone exits automatically.
The Handsfree Kit is paired and ready to use.
c.ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit.
1.Just press once on the
2.If you wish to answer the call on your cellular phone, just press the Menu key 
of the phone. On the Call Menu, scroll down to Use Handset, SELECT. Audio will be heard on the phone. Pressing back on the
3.To terminate the call, press the
Normal dialing
1.Enter the contact number and press SEND/ANS key. Audio can be heard on the Supertooth.
2.To terminate a call, press the
30