BlueAnt Wireless SUPERTOOTH II manual a.ACTIVATING THE BLUETOOTH, c.ANSWERING/RECEIVING A CALL

SONY ERICSSON K700i / S700i / Z1010 / Z600 / T610 / T628 / T630

a.ACTIVATING THE BLUETOOTH

You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your cell phone and other Bluetooth devices.

1.Press to access Main Menu.

2.Scroll to Connectivity, Select. Bluetooth, Select. Turn On, Select.

3.Continue pressing to exit.

b.PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit)

1.Bring the cellular phone at about 20 cm from the Handsfree Kit.

2.The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink).

3.Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode..

4.Press to access Main Menu. Scroll to Connectivity, Select. Choose Bluetooth, Select.

5.Scroll to My devices, Select. New device, Add. The phone will then search for pairable devices to be added.

6.The searched devices will then be displayed. Choose the device name you want to pair with this phone, then press Select.

7.Enter “0000” as the passcode then press Ok. If pairing is successful, the alternating red/blue lights (Bluetooth Indicator) will stop and will change to plain blinking blue.

8.Your device name is now added under My devices tab. Highlight the newly paired device and then press Connect to completely establish connection between your cell phone and your hands free kit.

9.When a statement appeared indicating that your device is connected, continue pressing

to exit.

The Handsfree Kit is paired and ready to use.

Notes: You only have to do the pairing process once for a particular phone. You will only redo the process if you want to pair it with another mobile phone. If you turn off your Hands-free kit, it will disconnect with your phone. If you turn it back on, you can reconnect by shortly pressing the Pick-Up/Hang-Up Button on the Supertooth once for T610/T628/T630. For K700i/S700i/Z1010/Z600 press the Pick-Up/Hang-Up button twice (Once will connect and then activate voice dialing on some versions).

c.ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit.

1.Just shortly press the Pick-Up/Hang-Up Button to answer the call.

2.In your cell phone, a question will be displayed “…Answer?” If you press YES button on your phone as reply, audio will still be heard on the SuperTooth.

To terminate the call, press the Pick-Up/Hang-Up Button.

63