BlueAnt Wireless SUPERTOOTH II NOKIA 3230/6260/6600/6670/7610/3650, a.ACTIVATING THE BLUETOOTH

NOKIA 3230/6260/6600/6670/7610/3650

a.ACTIVATING THE BLUETOOTH

You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.

1.	Press the Menu		key. Using the joystick, scroll to Connect, press				to select. A list of
2.	options will be displayed. Choose Bluetooth, press					to select.
	Bluetooth	OFF		will be displayed. Press	to switch Bluetooth On.

3.Continue pressing Exit key to get out of Menu. b. PAIRING TO THE CELLULAR PHONE

1.Bring the cellular phone at about 20 cm from the Handsfree Kit.

2.The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink).

3.Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for

about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in

Handsfree Pairing Mode.

4.	Press Menu	button. Using the joystick, scroll to Connect, press			to select. A list of
	options will be displayed. Choose Bluetooth, press			to select. Bluetooth		ON	.
	Sway button	to right side	. “Paired devices”	will be displayed as title. Press
	OPTIONS. New paired device, SELECT. “Searching for devices…” will be displayed.
	Select the Handsfree Kit and press SELECT. “Waiting for…” and “Passcode for…” will
	be displayed successively.

5.Enter “0000” as the passcode then press OK. “Waiting for…” and “Pairing with…complete” will be displayed successively.

6.Continue pressing Exit to get out of Menu.

The Handsfree Kit is paired and ready to use. An icon will be displayed during the standby mode indicating that the Handsfree Kit is linked with the phone.

Note: Once paired, press the Pick-Up/Hang-Up Button once to establish simultaneous connection between the Handsfree Kit and the phone. (Keypad tones can be heard on the Handsfree Kit every time the keypad is pressed). If ever the paired device was

deleted and turned off, once it is turned on, there is no need to undergo the same pairing procedure. Press the Pick-Up/Hang-Up Button once. “Passcode for…” will be displayed. Enter the passcode then press OK. “Accept connection request from…” press YES to reconnect.

c.AUTO ACCEPT MODE

The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth

Handsfree Kit.
1.	Press Menu button. Scroll to Connect and press			. Bluetooth, press . Sway
	button to right side		. “Paired devices” will be displayed as title.
2.	Select the name of the Handsfree Kit and press			. Scroll to Set as authorised, and
	press	to SELECT. “Connections will take place without confirmation. Continue?”
	press YES.

3.Continue pressing Exit key to get out of Menu. An icon will then appear on the upper right corner.

36