BlueAnt Wireless SUPERTOOTH II d.MAKING A CALL with the Handsfree Kit on, Normal dialing, Talk

d.MAKING A CALL with the Handsfree Kit on

Normal dialing

With your XDAII you can make a call using different methods. Please refer to your PC Phone’s User Guide.

The most direct method is by using the Phone keypad.

1.Press button to bring up the dialer screen.

2. Tap the number on the keypad, and then tap Talk key.

Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the case you have to press once on the Send Button to transfer the audio to the Kit.

3.To terminate the call, press down the Pick-Up/Hang-Up Button.

e.AUDIO TRANSFER DURING A CALL

1.Audio Transfer back to the XDAII can be done by accessing the phone’s

Bluetooth Headset icon.

Phone to Kit

Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button.

f.REJECTING A CALL

Rejecting a call must be done by selecting IGNORE on the phone or by pressing the Reject Button on the Supertooth II

g.SETTING THE VOLUME

Setting the volume can be done using the Volume Control.

1.Turn it clockwise to increase the volume.

2.Decrease the volume by turning it counter-clockwise.

Note: If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones.

Useful Information for XDA11

After pairing the Supertooth please make sure headphones are enabled on your XDAII. Tap Start....Settings... Today....Items and tick Profile. (Make sure profile is ticked).

This allows you to enable or disable the Supertooth. You will see a small headphones symbol on the main screen allowing you to connect or disconnect from the Supertooth quickly...

Note: The XDAII can only use one audio device set as the default. To use a second paired device as the default, a workaround is to rename the device.

48